Testing of Armature

Introduction to Testing of Armature

Later than an armature is wound and the leads are connected to the commutator, a test have to be carry out. By this test, defects might be revealed that might have take place during winding. The general defects in armature windings are grounding, open in the coil, shorts in the coils, and reversal in the coil connection. These types of defects can be located by dissimilar test procedures.

Armature winding resistance test:

The armature coils' resistance measured through using a low range ohmmeter and preferably along with the Kelvin Bridge. Resistance among the consecutive segments in the case of simplex winding (for wave and multiplex windings at a distance of commutator itch Yc) is computed.

The below diagram depicts a simple arrangement to compute the resistance among the successive commutator segments. As displayed in this diagram, a cotton tape along with a counterweight is passed around the commutator to hold the connecting leads to the segments.

80_Testing of Armature Homework Help.jpg

Measurement of resistance is completed in all the coils through changing the position of the connecting leads to successive commutator segments. The resistance measured should be similar in every coil. Lower resistance depicts short in turns, when a higher resistance depicts higher numbers of turn or open in the coil.

Latest technology based Electrical Engineering Online Tutoring Assistance

Tutors, at the www.tutorsglobe.com, take pledge to provide full satisfaction and assurance in Testing of Armature homework help via online tutoring. Students are getting 100% satisfaction by online tutors across the globe. Here you can get homework help for Testing of Armature, project ideas and tutorials. We provide email based Testing of Armature homework help. You can join us to ask queries 24x7 with live, experienced and qualified online tutors specialized in Testing of Armature. Through Online Tutoring, you would be able to complete your homework or assignments at your home. Tutors at the TutorsGlobe are committed to provide the best quality online tutoring assistance for Electrical Engineering homework help and assignment help services. They use their experience, as they have solved thousands of the Electrical Engineering assignments, which may help you to solve your complex issues of Testing of Armature. TutorsGlobe assure for the best quality compliance to your homework. Compromise with quality is not in our dictionary. If we feel that we are not able to provide the homework help as per the deadline or given instruction by the student, we refund the money of the student without any delay.

©TutorsGlobe All rights reserved 2022-2023.