Start Discovering Solved Questions and Your Course Assignments
CIVL 0016 Geotechnology: analysis and design of geotechnical structures specified in the assessment brief with considerable emphasis on sustainability.
CIVL 0003 Civil Engineering Construction: Investigate on various construction methods being implemented in Oman.
CIVL 0007 Civil Engineering Practice: Apply risk assessments in the context of construction design and management regulations.
CPCCBC4007A Plan building or construction work: Review the building plans to determine the requirements of the project and the site.
Apply established engineering methods to develop a functional design of a water system project, to meet or exceed Australian Standards and guidelines
SEV301 Water Engineering Design: Demonstrate a thorough understanding of water engineering fundamentals.
CON 4525 Measurement for Building Works: Simple RC Strip Foundation, take off all the quantities of work relating to the Sub-structure
CVE80004 Advanced Concrete Design: calculate the nominal value of uniformly distributed imposed load (LL) that the slab can support.
A framework towards sustainable construction of residential buildings: barriers, best practices and its implications on built environment in Sultanate of Oman
Explain the methods and techniques used in civil engineering for earthworks and substructures. Prepare a design proposal for a new infrastructure project.
CIV5MCM Mechanics of Composite Materials: Calculate engineering constant of lamina in increment of 100 in the range ( 0 = ? = 90° ) and plot this calculation.
CIV4284 - Traffic Systems: Design and conduct assessments of traffic networks as part of a team
CON4510 - Construction Technology and Building Temporary Works: Calculate the designed concrete pressures in kN/m2 at each 1.0 m vertical interval
CIVL 651 - Remote Sensing with Civil Engineering and Environmental Science Applications: Delineate watersheds from an elevation data
CPCCBC4001A - Apply building codes and standards to the construction process for low rise building projects: Relevant NCC/BCA Volume for the building type.
Calculate the moment of resistance (Mr) and the shear resistance (Vr) of the section. Use f'c = 25 MPa and fy = 350 MPa.
Write 500 words to describe best practice for carrying out an angular and a distance measurement with a total station.
Evaluate the performance of reinforcement concrete plane frames under lateral loads.
Construction Practice and Management: Describe the construction industry with reference to company structures and other activities
You are given a drawing. The drawing's title is "Aligned Shaft, Date: 10/01/07". Calculate the total height of the assembled components.
EG7035 Digital Construction and BIM: Ensure the concepts of Building Information Modelling and are able to create 3D model of a building by Autodesk Revit.
By equivalent seismic load method, check the Torsional Irregularity and Interstorey Stiffness Irregularity (Soft Storey) for the building.
ENGIN2503 Surface Mining Operations and Equipment: Explain various deciding factors related to choice of surface mining over underground mining methods.
EMS5CE - Cost Engineering: Your tasked to create a pre-tender estimate of the cost to produce and deliver the 'LTU Swiper'.
Draw the flow net on graph paper. Calculate the flow rate under the weir. Calculate the pore water pressure at point A shown in Figure 1.