Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
Use a numerical technique to estimate the temperature distribution in the bar at the following times: 0.5 sec, 1 sec, and 1.5 sec. You must use a simple explicit technique with a spatial discretizat
Consider a heat-exchanger control loop with no dead time. It is controlled by a PD controller. The rate time is 0.25 min. A real PD controller is used with filtering where α = 0.1.
Choose explain one membrane industrial separation application for (i) reverse osmosis (RO), (ii) ultra filtration (UF) and (iii) microfiltration (MF) (at least one of the three (in total) applicatio
Derive and solve a model of an insulated water tank with a changing level (i.e., changing tank volume). There is only one inflow stream with a flow rate of 1 kg/sec for t < 0 and 0.9 kg/sec for t
Find out the energy loss from the pipe per meter of length.
Calculate the pressure developed by the gas by each of the following: (a) Ideal gas law, (b) van der Waals equation and (c) Redlich-Kwong equation.
Use the slide 1 for temperatures t5, t6, t7& t8 to do the same as has it has been done in the slides 2, 3 , 4 and 5. Construct the triangle ternary diagram for the temperatures t5 , t6 , t7&nbs
Get the Delta H (Enthalpy) and Delta V (Volume) of both the components given below and compare by ratio. You require to use clapeyron equation and also need to draw the graphs.
Consider the 2D shape. Draw a possible configuration of nodes and cells (at least 15) that could be used to solve for the temperature distribution. Provide equations that would be used to solve for
Choose one functional unit from the following options for an LCA study that compares the environmental burdens of using beverage containers made of different materials (e.g. glass, plastic, carton).
Describe, with examples, three different industrial processes that successfully utilize zeolites.and explain how the selected zeolite’s structure influences its performance and why zeolites are
Describe the biological based on-site treatment of an industrial wastewater stream. The treatment system can be aerobic, anaerobic or a combination of both.
Sulfur trioxide (SO3) is manufactured by the gas-phase oxidation of SO2 over a platinum catalyst
For an enzyme that follows Michealis-Menten kinetics, the initial velocity at different substrate concentration has been determined.