Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Solved Assignments
Asked Questions
Answered Questions
Discuss Law of Reciprocal deflections or Maxwell’s reciprocal theorem. Using strain energy technique, evaluate the central deflection of simply supported beam with UDL.
Discuss the Titanium alloys and their applications in aircraft construction. Illustrate out the surface treatments given to aluminum.
Sketch the neat architecture of the 8255 – PPI and describe the different modes of operation along with its control words.
Write down the name of types of polymers which are used in air plane. Illustrate briefly the fibers and resins for manufacture of composites.
Discuss the ignition system of jet engine with the use of neat sketch. Illustrate out the different de-icing and anti-icing system for the heavy aero plane.
Illustrate out the typical auto pilot system with the use of neat sketch. Discuss the different types of the fuel systems in modern aircraft.
Describe the engine instruments. In brief discuss the operation of diaphragm type pressure instruments.
Illustrate out the Architecture of the 8085 with the use of neat diagram. Discuss the Measurement System with its elements.
Illustrate out the working principle between different types of shift registers? Sketch the Pin configuration of the 8085 microprocessor and explain.
Mention four 8-bit microprocessors. Write down the use of the actuators and sensors.
Explain the modes of operation of the DMA controller.
Describe the working principle of three phase synchronous motor.
Specify the applications of the synchronous motor?
Deduce continuity equation in Cartesian co-ordinates.
Explain what is Arc suppression coil grounding.
Describe the construction and working principle of Impulse Turbine. Find the Work done and efficiency of the Pelton wheel.
Explain the benefits of the valve type arrester.
Write down the difference between Newton law of viscosity for fluids and Hooke’s law of elasticity for solids?
Describe the 3 phase to 2 phase and the 3 phase to 6 phase transformer conversion.
Illustrate that inertia force to viscous force gives Reynolds number.
Deduce Bernoulli’s equation for flow of an incompressible frictionless fluid from consideration of momentum.
Specify the different parts of the DC machine. Specify function of commutator in the dc machine?
Describe hydraulic co-efficient in detail. Define Buckingham pi theorem.
Pelton wheel has mean bucket speed of 10 m/s with the jet of water flowing at a rate of 750 liters/sec under a head of 30 m.Compute the power given by water to runner and hydraulic efficiency of the t
Plate 0.025 mm distance from the fixed plate, moves at 60 cm/s and needs force of 2 N/m2 to maintain this speed. Find out the fluid viscosity between plates.