Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Solved Assignments
Asked Questions
Answered Questions
Specify the three laws of thermocouples. Explain in detail.
Explain the importance of flow measurement.
Describe the importance of Data Clustering algorithms in detail.
Explain the different kind of machining operation which can be carried on the lathe.
Explain the classification of the Non-traditional machining processes.
Describe Back propagation algorithm for learning in multilayer feed forward networks. What do you think the limitations of this algorithm? Write down suggestions to overcome these limitations.
Describe the working of vapour absorption refrigeration system.
Describe the defects of shift in threshold voltage in a p-channel and n-channel MOSFET.
Describe the morse test for determining the indicated power of the multi cylinder engine.
Explain how do you measure the quality of air supplied to the IC engines.
A shaft of diameter 10 mm carries at its centre a mass of 12 kg. It is supported by two short bearings, the centre distance of which is 400 mm. Compute the whirling speed.
A horizontal cross compound steam engine computes 300 kW at 90 rpm. The coefficient of fluctuation of energy as found from the turning moment diagram is to be 0.1 and the fluctuation of speed is to
Describe the techniques to measure Cit and calculate the Cs and Ps values in high frequency techniques.
Explain the Simple Harmonic motion. Describe about the degree of freedom.
A porter governor has all four arms 300 mm long. The upper arms are attached on the axis of rotation and the lower arms are attached to the sleeve at a distance of 25 mm from the axis. The mass of e
PQRS is a four bar chain with link PS is fixed. The lengths of the links are PQ=62mm; QR=175mm; RS=112mm and PS=200 mm. The crank PQ rotates at 10 rad/sec clockwise. Develop the velocity and acceler
Explain the quaternary joint and ternary joint.
What is meant by kinematic indeterminacy and its relation with stiffness matrix?
Explain the Static CMOS and Cascaded voltage switch logic with the suitable diagram.
Explain what is Photolithography? Explain the four basic MOS Layers.
Explain ‘Gibbs Phase rule’. What is its significance? How are equilibrium diagrams categorized? Write down the different Heat-Treatment processes and describe any two of them briefly.
Write down difference between Brittle fracture and Ductile fracture.
Describe about subroutine call and returns in detail.
Describe asynchronous data transfer in detail. What is meant by serial communication?
Describe about I/O bus and Interface modules? Describe in detail about Daisy Chaining priority?