Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
What are the problems faced when O.C relays are used for the protection of E.H.T. lines.
What is a universal torque equation of relay and how is O.C. directional and differential relay characteristics obtained?
Define the term welding? What is the importance of welding? Categorize the types of welding?
Describe what an Electric Drive is and describe different types of Electric drives.
What do you mean by the term armature reaction? Describe the effect of armature reaction on the terminal voltage of an alternator at:
What are the benefits and drawbacks of using short – pitched winding and distributed winding in alternator?
Distinguish between Asynchronous counter and synchronous counter? Design a 4-bit counter in synchronous mode.
Design 4:1 Mux with logic diagram and symbolic representation.
Describe with neat diagram interfacing of TTL gate and CMOS gates.
If the maximum output voltage of a 7-bit D/A converter is 25.4V. What is the smallest change in the output as the binary count increases?
Draw and explain the functional block diagram of IC 555.
Explain the operation of RC phase shift oscillator using op-amp and derive the expression for frequency of oscillations.
Draw the circuit and describe the operation of instrumentation amplifier by using Transducer Bridge. Derive the expression for its output voltage.
Broadly categorize the integrated circuits for a broad range of applications.
Draw and describe the architectural diagram of PSoC. Explain about analog and digital blocks of PSoC with neat diagrams.
Define the term embedded system? Write all the applications of embedded systems.
Draw the Programming model of 8051 µc. How the memory is organized in 8051 µc.
Define the term threshold voltage of a MOS device and describe its significance.
Describe the working of 8 × 8 Omega Switching network.
What do you mean by the term paging? Describe how the method of paging can be implemented.
Describe techniques available for sequencing of micro instructions based on the address format.
Describe how various instruction are executed in computer with diagram of instruction cycles?
What do you mean by the term linear array? Compare Broad side array and End fire array?
What are the different merits and demerits of loop antennas?
Derive the Transfer Function for armature controlled d.c. motor, with neat diagram and describe the benefits of armature controlled d.c. motor over field controlled d.c. motor.