Why the stress exceeding the yield stress of the material, Mechanical Engineering

+44 141 628 6080
[email protected]

Why the stress exceeding the yield stress of the material

A cylinder 10 feet long has an ouside diameter of 2 inches and a 1mm thick wall. The yield strength of the wall material is 5x 10^3 lbf/ in^2 in tension, 1.5 x 10^3 lbf/in^2 in compression, and 1 x 10^3 / in^2 in shear

At what pressure(give type: tension, compression, or shear) would this cylinder fail( due to the stress exceeding the yield stress of the material) if the high pressure were inside the cylinder?

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Why the stress exceeding the yield stress of the material

Reference No:- TGS0738121

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : Determine the magnitude of the current density

A 5.00 m length of 1.8 mm diameter wire carries a 700 mA current when 18.0 mV is applied to its ends. Assume the drift velocity is 1.7 × 10-5 m/s. Determine the magnitude of the current density

Q : Why the flow is frictionless and adiabatic

For air flowing in a converging-diverging nozzle, the pressure and temperature at the inlet are 14.7 psia and 70°F. At some location in the diverging portion of the nozzle, the pressure is 1.37 psia.

Q : What wall thickness is required

The pressure inside the cylinders of a diesel engine reaches a maximum pressure of 100atm during combustion. The diameter of the cylinder is about 5 inches.

Q : Find total change in entropy of universe due to cooling

If the surroundings are treated as a thermal reservoir, what is the total change in entropy of the universe due to this cooling process?

Q : Why the stress exceeding the yield stress of the material

At what pressure(give type: tension, compression, or shear) would this cylinder fail( due to the stress exceeding the yield stress of the material) if the high pressure were inside the cylinder?

Q : Find volumetric flow rate into the compressor

Determine: The turbine power output The fraction of the turbine output used to drive the compressor. The mass flow rate of air into the compressor. The volumetric flow rate into the compressor.

Q : What would the wall thickness need to be to withstand

If the vessel had a yield strength in compression in equal to that of 4340-HR steel (901 x 10^6Pa) and a safety factor of 2 was employed, what would the wall thickness need to be to withstand the pressure at the bottom of Challenger Deep (1086 atm

Q : What torque should be applied during the assembly

If the polymer has a shear modulus of 400 MPa and the tube has outside diameter 50 mm and wall thickness 3 mm, what torque should be applied during the assembly? (Gstainlesssteel = 80 GPa).

Q : Decay constants for radium and radon

Radium (Ra) decays to radon (Rn) which decays to polonium. If at t = 0, a sample is pure radium, how much polonium does it contain at time t? Suppose No is the number of radium atoms at t = 0, and Lambda1 and Lambda2 are the decay constants for Ra

1922991

Questions
Asked

3,689

Active Tutors

1423547

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Why the stress exceeding the yield stress of the material

Reference No:- TGS0738121

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : Determine the magnitude of the current density

Q : Why the flow is frictionless and adiabatic

Q : What wall thickness is required

Q : Find total change in entropy of universe due to cooling

Q : Why the stress exceeding the yield stress of the material

Q : Find volumetric flow rate into the compressor

Q : What would the wall thickness need to be to withstand

Q : What torque should be applied during the assembly

Q : Decay constants for radium and radon

What culture says about caring for elderly individuals

What stake when people operate out of ignorance-stereotypes

How america changing population shaped political landscape

Analyze the influence of classical social theory

Which sociologist suggested viewing problem as being real

Conduct internet search on a victimological topic

To what extent should ideology be the foundation of identity

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Why the stress exceeding the yield stress of the material

Reference No:- TGS0738121

Recent Questions Asked Mechanical Engineering

Q : Determine the magnitude of the current density

Q : Why the flow is frictionless and adiabatic

Q : What wall thickness is required

Q : Find total change in entropy of universe due to cooling

Q : Why the stress exceeding the yield stress of the material

Q : Find volumetric flow rate into the compressor

Q : What would the wall thickness need to be to withstand

Q : What torque should be applied during the assembly

Q : Decay constants for radium and radon

Asked Questions