Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
Find out the magnitude and direction of the force of the electron traveling 2.84x10^5 m/s horizontally to the east in a vertically upward magnetic field of the strength 1.6T
Compute magnetic force on a 180 m length of wire stretched among the two towers and carrying a 280A current. The magnetic field of earth is 5.00 x 10^-5T makes an angle of 60 degrees with the wire.
The force on a wire carrying a 30 A is utmost of 3.8N if located between the pole faces of a magnet. When the pole faces are 25 cm in diameter, determine the estimated strength of the magnetic field
Determine the force per meter on a wire carrying a 3.60 A current if perpendicular to a 1.2T magnetic field. What when the angle between the wire and field is around 45 degrees?
A +3.0 nC charge is at x = 0 cm and a -1.0 nC charge is at x = 4 cm. Determine the point or points on the x-axis which is the electric potential zero? Enter your answer numerically separated by comm
Determine the velocity of a 6.5 g ball shot vertically upward from the spring gun with the force constant of 670 N/m, compressed 5.00 cm?
Avoiding the air resistance, determine the range ofthis projectile when it is fired at an angle such that the range equivalent the greatest height attained.
A sports car crosses the bottom of the valley having radius of curvature equivalent to 95. At the very bottom the normal force on the driver is double his weight. At what speed was the car traveling
The object with a height of 2.54 cm is located 36.3 mm to the left of a lens having a focal length of 35.0 mm Where is the image situated? Determine the height of the image?
A charge of -338e is uniformly distributed all along a circular arc of radius 6.70 cm, that subtends an angle of 41o. Determine the linear charge density all along the arc?
If the area containing the electric field is 4.98 mm long (too short for the electron to stop in it), and what fraction of the electron's initial kinetic energy will be vanished in that area?
An electric dipole having charges +2e and -2e separated by 1.0 nm. This is in an electric field of strength 4.7 x 106 N/C. Compute the magnitude of the torque on the dipole when dipole moment is (i)
Determine (i) the magnitude of the electric dipole moment and (ii) the difference between the potential energies for dipole orientations parallel and anti-parallel to?
Compute the average angular speed of the planet about its own axis of rotation in radians per second, with the second as measured on the earth.
The two isolated masses, M1 = 2.00 and M2 = 675 are primarily rest, a distance d = 111 apart. Their gravitational attraction is the mere force acting.
Determine the magnitude of the B-field as a function of the distance y away from the wire?
Plates of the spherical capacitor have radii 54.8 mm and 57.3 mm. (i) Compute the capacitance in pico-farads. (ii) What should be the plate area in square centimeters of a parallel-plate capacitor w
To tighten a spark plug, it is suggested that a torque of 15.6 N•m be exerted. When a mechanic tightens the spark plug with a wrench that is 24.2 cm long, determine the minimum force essential
A solid cylinder of mass M and radius 'a' rolls without slipping down an inclined plane of angle α. (i) Illustrate that the acceleration is constant and equivalent to a = 2/3 g sin α.
When the electric charge didn’t exist and electrons were bound to protons by the gravitational force to form hydrogen, obtain the corresponding expressions for ao and En and calculate the ener
Determine the radius of the equipotential surface which consists of a potential equivalent to 530 V? Is this surface closer to the wire or to the cylinder? (In cm) And the equipotential surface clos
Employ Ampere’s law to obtain an expression for the magnetic field as a function of r (the distance from central axis) at points within the outer conductor (R_2i < r < R_2o). Employ this
A water line having an internal radius of 0.00580 m is joined to a shower head which consists of 14 holes. The speed of the water in the line is around 1.2 m/s. (i) Determine the volume of flow rate
An airplane has an efficient wing surface area of 15 m2 which is producing the lift force. In level flight the air speed over the top of the wings is 63.9 m/s, whereas the air speed below the wings
Water flowing out of the horizontal pipe emerges via a nozzle. The radius of pipe is 2.1 cm, and the radius of the nozzle is 0.47 cm. The speed of the water in the pipe is 0.67 m/s. Treat the water