Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
A square pyramid of side of base 30 mm and height 80mm rests on HP on its base with a base edge perpendicular to VP. Design the elevation, sectional plane and true shape of the section.
Create the ellipse where a part of conjugate diameters AB and CD are equal to 150mm and 75mm respectively. Angle between conjugate diameter is 75o.
What is meant by first-angle projection method? Explain in detail with suitable example. What is meant by an oblique prism?
Write down the benefits of air transport to nation.
Describe the loading effect on potentiometers in detail.
Write down any two applications of the AFM. Write down any two applications of the chromatography.
Explain the impulse response and step response of first order transducer in detail.
Voltage across a resistor is= 200V, with probable error of= ± 2%, and the resistance is= 42 ohms with a probable error of= ± 1.5%. Compute the power dissipated in resistor and pe
Explain the role of measurement tools in rehabilitation engineering. Explain the different strategies used for post surgery recovery of a below knee/above knee amputee.
Discuss the different positioning, anatomical sites and intuitive operation for limb prosthesis. Illustrate out the factors which are to be considered in myoelectric hand prosthesis.
Write down the factors which are to be considered for wheel chair design. Write down the mechanism of the power controlled wheel chair.
What is meant by Histogram? Write down its advantages. Write down the principle of a proximity sensor.
What is ‘zero lift angle of attack’? Provide a brief account on Von Karman Vortex Street.
Discuss Law of Reciprocal deflections or Maxwell’s reciprocal theorem. Using strain energy technique, evaluate the central deflection of simply supported beam with UDL.
Discuss the Titanium alloys and their applications in aircraft construction. Illustrate out the surface treatments given to aluminum.
Write down the name of types of polymers which are used in air plane. Illustrate briefly the fibers and resins for manufacture of composites.
Discuss the ignition system of jet engine with the use of neat sketch. Illustrate out the different de-icing and anti-icing system for the heavy aero plane.
Illustrate out the typical auto pilot system with the use of neat sketch. Discuss the different types of the fuel systems in modern aircraft.
Describe the engine instruments. In brief discuss the operation of diaphragm type pressure instruments.
Write down the two advantages of axial flow compressor over centrifugal type.
What are the advantages of having a semi-cantilever type of wing construction?
Crankshaft 200mm in diameter is subjected to the bending moment of 18.5 KN-m and twisting moment of 27.75 KN-m. Determine the greatest shear stress. Also determine the plane of maximum shear stress
Write the formula for determining the crippling load for different end conditions of column.
Design the variation of power available with flight speed for the propeller powered airplane and indicate the effect of altitude on the curve.