Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
Determine the governing relation to find out the shear stress in beams. Deduce a relation for the shear stress across a rectangular section. Find out the maximum value of shear stress?
A 6 m long cantilever carries loads of 2 kN and 3 kN at 2m and 5m correspondingly from fixed end and a UDL of 10 kN/m over its whole length. Draw the shear force and bending moment diagrams.
Define the terms: Elasticity, elastic limit, Young’s modulus and modulus of rigidity.
Which is the most significant of the Hume Ruthery rules?
Define the terms grain and grain boundary? How does the presence of grain boundary influence the physical and mechanical properties of metals?
Describe the difference between batch repetitive flow line and mixed model repetitive flow line.
Describe with details pulverizer control, draft control and combustion control in boilers.
Describe any three devices which are used for high pressure measurement with proper diagrams.
Explain the necessary elements of hydroelectric power plant with appropriate sketch.
With a neat diagram and describe the importance of detonation and position sensor.
Describe the common troubles in the transmission system and write down all the appropriate remedies.
With neat sketch describe the working of synchromesh gear box and Multi-plate clutch.
What are the hierarchy of visual weightage for different forms and elements in the architecture?
Describe about the Dimensioning concepts, Editing texts, Style overrides and the Geometric tolerances.
Derive the expression relating impulse and linear momentum. In the safety test, a car of mass 1000 kg is driven into a brick wall. Its bumper behaves like a spring (k= 5×106Nm−1) and is
Design and draw a circuit by using cascade system to operate two cylinders A and B which, on the operation of a start valve, produces the sequence A – B + B – A+.
The orthographic views of a machine bracket are shown in figure below. Draw isometric view from such views and dimension them.
Given figure illustrated below shows the top-view and front of a cylinder, cut by a Sections-plane V.T. Show its Sectional-Top-View.
There is a proposal for constructing a small dam across a rain-fed river to make water available for irrigation. A reconnaissance survey has been completed. Make a feasibility report for constructin
Categorize milling machines and list them accordingly. How milling operation distinct from turning operation on lathe?
2-D & 3-D Simulations of the flow around a circular cylinder normal to the flow direction using FLUENT.
Determine distribution of shear force, bending moment and stress due to bending in the simply supported beam shown in the figure below, the beam self-weight is included in the uniformly distributed
The self-weight of the beam itself might be neglected when computing the maximum moment.
Supposing that a 20 MW simple cycle gas turbine with a firing temperature of 1600 K develop an analysis of a combined cycle.
Design for a water treatment plant taking 15MLD of water from a lake at 750mAOD, passing it via settlement tanks on to pressure sand filters, and from there into a chlorine contact tank to TR60 of 3