Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Solved Assignments
Asked Questions
Answered Questions
Find shape factor for ‘T’ section with flange width 100mm, Depth 100mm and thickness of flange & web 10mm. Describe upper bound, lower bound and uniqueness theorem.
Using Octave, create and test set of programming statements to generate fs bandpass ranges (2fc -B)/m & 2fc + B)/(m+1)) along with minimum fs value (fs >=2B), and positioned sampled sp
Explain in detail which problems were encountered while building Linux from Scratch system (LFS) and how these problems were resolved?
Describe Halstead's major Equations for following: Total Vocabulary, Length, Volume, Level. Compute estimated program length and efforts required by taking appropriate example?
Draw and describe the DMA operation with respect to 8085. What is the functionality of SOD and SID in 8085? Explain RS 232C interface.
Describe various interrupts of 8085. Describe mode 0 and mode 1 operation of 8253 with neat diagrams. Draw the block diagram of 8253. Explain in brief. What is ISR? How is it executed in 8085?
Modify the state diagram branching conditions in the diagrams shown below as required to make sure the sum and exclusion rules are obeyed in each case. You can add a holding conditions or change bra
One of the sidebands of an AM (DSB-LC) broadcast station is measured to have a power of 63 dBm. If the modulation is 100%, what is the total signal power in watts?
Describe viscosity coefficient? What are Non Newtonian Fluids? Describe in detail different types of Non Newtonian Fluids.
With the pump curves given, develop an efficiency curve for the pump and determine the maximum efficiency and the efficiency at which the pump system will operate.
Describe the various Building Information Modeling and CADD software. Describe the various visualization software with file extensions and compatibility.
Describe the various operations in Algorithmic architecture. Describe the concept of folding in architecture with reference to topological developments.
The entrance is inward projecting. What flow (gpm) can be expected if the gate valve is one-half open?
What is Time of Reverberation? How is reverberation time computed? State the optimum time of reverberation for the following buildings: Cinema theatres and Music concert hall.
A suspended ceiling in T.W/G.I, is to be provided for the office of size 4.0 m x 3.0 m, with a clear height of 3.0 m. Draw reflected ceiling plan and section to the scale of 1 : 20. And draw any thr
Briefly explain how the CRC (Class-Responsibility-Collaboration) index card approach may be used in Object Oriented Analysis.
Explain in detail causes of scale deposition and describe how scales are removed chemically and mechanically.
Describe the physical principle of Litho-Density Tool. Explain the environmental effects on the modern Induced Gamma Ray spectra spectrometry.
Define and describe the ‘Pressure Transient Analysis’ with the help of diffusivity equation.
Explain the open-hole completion method with its advantages and disadvantages. What are packers? List the different packers and give the advantages of retrievable packers.
Explain in details the conventional resistivity logging method with reference to principle, devices used, log presentation and application.
What do you mean by capillary pressure and wettability in the reservoir fluids? Explain their effects on oil and gas displacement in the reservoirs.
What is the need for flaring in the oil industry? Describe the concept of smokeless flame and explain various factors associated with it.
Explain with neat diagrams, the stratigraphic control of the sealing of fault traps.
Write in detail the significance of micropaleontology in Geological applications. Describe the term Paleoecology. Enumerate your answer giving criteria to establish the Paleoecology of foraminifera