Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Solved Assignments
Asked Questions
Answered Questions
general factors behind accident following are the factors which may cause accidents in workshop so we should take care of these factors
rubber hoses fuel or vacuum hoses should be installed so that end is bottomed into its fitting which would ensure adequate area for the hose clip to
torque of multiple and different sized fasteners first tighten all fasteners by the help of free hand then torque big fasteners first followed by
reassembly position of critical parts care should be taken to note the position of the unidirectional parts while dismantling the engine this
loosening a part with multiple fasteners loosening a part with multiple fasteners should be done from the outside to inside in a criss-cross pattern
control cables never bend or distort control cables this will lead to stiff operation and premature cable failurerubber parts beware of parts
special tool use special tools wherever applicable special tools are designed to dismantle or assemble a specific part or assemblies without causing
used engine oil used engine oil may cause skin disease if repeatedly in contact with the skin for prolonged time it is advisable to thoroughly wash
battery electrolyte and gases battery emits explosive gases keep sparks and flames away ensure adequate ventilation while charging the batterybrake
petrol work in a well-ventilated area keep flames or sparks away from the work area or where petrol is
carbon monoxide if the engine has to be started make sure the area is well ventilated never start the engine in an enclosed area without using
objectives after studying this general safety and services tips you should be able to appreciate the importance of safety precautions accomplish the
introduction safety is very important which is often neglected at our workplaces small precautions if carried out regularly can ensure safe hygienic
service and maintenance procedures you have studied detailed procedure of motorcycle service and maintenance and points to be remembered while
inspection of electrical equipmentsteps all electrical equipment are checked for proper functioning the starting and lighting of the motorcycle
inspection of tyres steps both the tyres are checked for free rotation loose spokes are to be tightened at the same time it is checked that the
clutch free play adjustment a smooth operation of clutch ensures the smooth running of motorcycle hence it is essential to maintain a proper clutch
a what is the function of a throttle valve where it is usedb how do we adjust throttle free
throttle free play adjustmen a smooth operation of the throttle ensures proper acceleration of the vehicle according to the requirement of the rider
brake wear inspection and free play adjustment brake wear inspection is very important because worn out brake shoe does not provide good braking at
a what is value of drive chain slacknessb write about cleaning procedure and adjustment of drive chainc what is the wear of drive chain sprocket and
drive chain cleaning and adjustment the service life of the drive chain depends on proper lubrication and adjustment poor maintenance can cause
carburettor tuning it is very important that the carburettor is tuned properly to attain the best fuel efficiency and performance of the
a what may happen if carburettor is not serviced at a regular intervalb what is the procedure of carburettor
carburettor cleaning carburettor needs to be cleaned otherwise the jets may get clogged which may supply an inadequate amount of air fuel mixture