Radio Receiver Alignment

Introduction to Radio Receiver - Alignment

It is the method to keep a receiver in right condition.

ALIGNMENT

The procedure of adjusting tuned circuits and settings the variable capacitors to enhance the selectivity and sensitivity of the receiver is known as alignment.

It is categorized as follows:

1. IF alignment

2. RF alignment

Intermediate frequency transformers (IFT) are tuned in IF alignment. In RF alignment, antenna and oscillator tuned circuits are tuned.

REQUIRMENT

1. RF signal generator

2. Alignment screw drivers..

3. Output voltmeter

4. Working receiver

5. Multimeter

IF ALIGNMENT

 

672_Alignment Homework Help.jpg

SETTING THE RECEIVER

1. Disconnect the aerial of receiver.

2. In place of speaker connect the output meter.

3. The receiver's Oscillator section should be disabled.

4. Connect the terminals of signal generator to the input points of IF amplifier.

5. AVC has not functioned.

6. Volume control should be in maximum position of it.

7. Tone control should be in minimum position of it.

SETTING THE GENERATOR

1. Put the generator in ON position of it.

2. Mode and band selector controls should be in wanted positions.

3. Select the needed IF signal (455 KHz) through tuning the frequency selector.

4. RF output control should be in maximum position of it.

5. Output terminal (Cable) is to be connected at RF output point.

Latest technology based Electrical Engineering Online Tutoring Assistance

Tutors, at the www.tutorsglobe.com, take pledge to provide full satisfaction and assurance in Radio Receiver Alignment homework help via online tutoring. Students are getting 100% satisfaction by online tutors across the globe. Here you can get homework help for Radio Receiver Alignment, project ideas and tutorials. We provide email based Radio Receiver Alignment homework help. You can join us to ask queries 24x7 with live, experienced and qualified online tutors specialized in Radio Receiver Alignment. Through Online Tutoring, you would be able to complete your homework or assignments at your home. Tutors at the TutorsGlobe are committed to provide the best quality online tutoring assistance for Electrical Engineering homework help and assignment help services. They use their experience, as they have solved thousands of the Electrical Engineering assignments, which may help you to solve your complex issues of Radio Receiver Alignment. TutorsGlobe assure for the best quality compliance to your homework. Compromise with quality is not in our dictionary. If we feel that we are not able to provide the homework help as per the deadline or given instruction by the student, we refund the money of the student without any delay.

©TutorsGlobe All rights reserved 2022-2023.