Create a new drawing and draw the kitchen range symbol shown in Fig. 18-10. The square is 5 units on each side, the large circles are R.8, and the small circles are R.6. Locate the circles approximately as shown: equidistant from the adjacent sides, with the large circles in the upper left and lower right corners. Notice that this is an incorrect symbol for a kitchen range. The large and small circles should be reversed. You can fi x this by rotating the circles 90°. To make sure the circles stay in their same relative locations, rotate them around the center of the square. To do this, first draw two diagonal lines, as shown in Fig. 18-11. Then enter the ROTATE command and select the four circles and two diagonal lines. After you have completed the rotation, erase both of the diagonal lines. Then scale the range to 25% of its current size. Save the drawing as range.dwg.
