Design a box section to be used as a cantilever beam of


Redesign the box-beam of Example 1 and 2 to make better use of the material; i.e., changing the geometry of the cross-section in such a way that the serviceability (deflection) requirement is met without over dimensioning for strength as much as it is done in Example 2.

Perform the new design for a reliability of 99.5% assuming the load and strength variability are represented by Cσ = 0.2, CF = 0.3.

Example 1

Design a box section to be used as a cantilever beam of length L = 2 m subject to a tip load P = 1000 N. Limit the tip deflection δ to 1/300 of the span L of the beam.

Example 2

Verify that the box-beam (Figure beow) designed in Example 1 is sufficiently strong, for a reliability of 99.5%, assuming the load and strength variability are represented by Cσ = 0.2, CF = 0.3.

1795_Figure 2.jpg

Request for Solution File

Ask an Expert for Answer!!
Other Engineering: Design a box section to be used as a cantilever beam of
Reference No:- TGS02157809

Expected delivery within 24 Hours