• Q : Problem related to condensation....
    Chemistry :

    What volume and mass of steam at 100 degrees C and 1.00 atm would, during condensation, release the same amount of heat as 100.cm^3 of liquid water during freezing? What do you note, qualitatively,

  • Q : Calculate the ph at the equivalence point....
    Chemistry :

    Calculate the pH at the equivalence point for the titration of a solution containing 1250.0 mg of hilariamine (MW = 104.75 g/mol, Kb = 7.1×10-4) with 0.1000MHCl solution.

  • Q : How much lioh must be taken in a seven day mission....
    Chemistry :

    With this, and assuming a space crew of five, how much LiOH must be taken in a seven day mission? Take into consideration a safety factor of 200%.

  • Q : Determine molar concentration of the ammonia....
    Chemistry :

    If 18.4 mL of 0.800 M~rm HCl solution are needed to neutralize 5.00 rm mL of a household ammonia solution, what is the molar concentration of the ammonia?

  • Q : Describe the students error....
    Chemistry :

    A student reported the following % for his unknown mixture: 25% NH4Cl, 30% NaCl, and 50% SiO2. Assuming that the calculations were done correctly, explain the students error.

  • Q : Calculate the final temperature of metal and water mixture....
    Chemistry :

    The mixture of hot iron and aluminum is then dropped into 96.0 g of water at 20.7°C. Calculate the final temperature of the metal and water mixture, assuming no heat loss to the surroundings.

  • Q : Determining the partial pressure of oxygen....
    Chemistry :

    A gaseous mixture of and contains 36.8 nitrogen by mass. What is the partial pressure of oxygen in the mixture if the total pressure is 685 ?

  • Q : How long does it take initial concentration to reduce....
    Chemistry :

    The rate constant for the reaction at 30oC is 0.120 L*mol-1*s-1. How long does it take an initial concentration of 0.150 mol/L to reduce to one-quarter the initial concentration?

  • Q : What volume would the dry gas occupy at standard pressure....
    Chemistry :

    A 40.0 mL sample of oxygen is collected by water displacement at 24.0 degrees celcius. What volume would the dry gas occupy at standard pressure if the original pressure is 98.5 kPa?

  • Q : Deduce the formula of the hydrocarbon....
    Chemistry :

    When 10cm3 of a gaseous hydrocarbon CaHb was exploded with an excess of oxygen, a contraction of 35cm3 occured (all volumes are measured at rtp). On treatment of the product with NaOH solution, a co

  • Q : New pressure in the bicycle tire....
    Chemistry :

    A bicycle tire is filled with air to a pressure of 100. psi at a temperature of 19 degrees celcius. Riding the bike on asphalt on a hot day increases the temperature of the tire to 58 degrees celci

  • Q : Electron configuration and orbital energies....
    Chemistry :

    Despite the expected decrease in atomic size, there is an unexpected drop in the first ionization energy between Groups 2A and 3A in periods 2 through 4 (e.g., Be to B). Explain this pattern in term

  • Q : Explain influence of temperature on the equilibrium....
    Chemistry :

    What can you conclude about the reaction from the influence of temperature on the equilibrium. What can you conclude from the influence of increasing the volume.

  • Q : What is the ph of the buffer solution....
    Chemistry :

    A buffer solution is prepared by adding 15.0 g NaC2H3O2 and 12.5 g acetic acid (C2H4O2) to enough water to make 500.0 ml of solution. What is the pH of the buffer solution? [pKa of acetic acid is 4

  • Q : Type of inhibition caused by heat....
    Chemistry :

    What are some differences and similiarities in the type of inhibition caused by heat, acid or base, and heavy metal ions on enzyme activity?

  • Q : How many moles of oxygen gas were evolved....
    Chemistry :

    A test tube containing a mixture of KCl, KClO3, and MnO2 having a total weight of 23.584 g was heated to compose the KClO3. After heating, the mass was found to be 22.347 g. a) How many moles of oxy

  • Q : Average atomic mass of m....
    Chemistry :

    When M2S3 is heated in air, it is converted to MO2. A 4.000g sample of M2S3 shows a decrease in mass of .277 g when it is heated in air. What is the average atomic mass of M?

  • Q : What is the ph change of a 0.270m solution of citric acid....
    Chemistry :

    What is the PH change of a 0.270M solution of Citric Acid (pKa = 4.77) if citrate is added to a concentration of 0.145M with no change in volume?

  • Q : How many grams of oxygen gas are produced....
    Chemistry :

    if 500g of potassium chlorate solid decomposes and produces 303g of potassium chloride solid, how many grams of oxygen gas are produced?

  • Q : Glucose in a volumetric flask related problem....
    Chemistry :

    Student placed 18.5 of glucose () in a volumetric flask, added enough water to dissolve the glucose by swirling, then carefully added additional water until the 100.- mark on the neck of the flask w

  • Q : Concentration of iron....
    Chemistry :

    If 5.00 ml of a solution containing .0400 M iron is placed in a 100.0 ml volumetric flask and filled to the mark with deionized water, what will be the concentration of iron in this new solution?

  • Q : What is the activation energy for the reaction....
    Chemistry :

    If the rate increases by a factor of 10 as the temperature increases from 35 °C to 70°C, what is the activation energy for the reaction?

  • Q : Calories of heat energy....
    Chemistry :

    If you started a ride with ice packs that held 1300 g of frozen water at 0 rm{^{circ}C} , and the temperature of the water at the end of the ride was 32 rm{^{circ}C} , how many calories of heat ene

  • Q : Determine the mass of lithium hydroxide produced....
    Chemistry :

    Determine the mass of lithium hydroxide produced when 0.38 g of lithium nitride reacts with water according to the follow equation: Li3N + 3H2O equals NH3 + 3LiOH.

  • Q : Determine the rate constant for reaction....
    Chemistry :

    The reactant concentration in a zero-order reaction was 6.00×10-2 {it M} after 185 s and 1.00×10-2 {it M} after 330 s. What is the rate constant for this reaction?

©TutorsGlobe All rights reserved 2022-2023.