--%>
Assignment Help - homework help

Lubricating oil in turbines

Except the lubrication, explain the other two functions of the lubricating oil in some of the turbines?

E

Expert

Verified

Within the larger units, lube oil cools the bearings by carrying off the heat to the oil coolers. Lube oil in some of the turbines also acts as the hydraulic fluid in order to operate the governor speed-control system.

   Related Questions in Mechanical Engineering

  • Q : What is machine shop Machine shop : A

    Machine shop: A facility which employs machines to fabricate devices from stock raw materials or to change mechanisms based on given specifications. Also termed as "Back" Shops. The general machines in a machine sh

    		•
  • Q : Problem on steam turbine 1) A steam

    1) A steam turbine takes in saturated steam at 300oc and outputs steam at 4 bar. When the efficiency of the turbine is 65%, Evaluate: a.  The final composition (vapor vs. liquid) of outgoing steam.b.  The

    		•
  • Q : Problem on damping coefficient Vertical

    Vertical suspension system of a car can be modeled as single degree of the freedom system. Consider that the car with mass m consists of four shock absorbers with equal stiffness and damping of k and c, corresspondingly: (a) Due to

    		•
  • Q : Causes and consequences of dynamic

    Discuss the causes and consequences of dynamic loading on structures based on two real examples. Support your discussion with proper diagrams or sketches. Your discussion shall include the time and location of the event, type and source of dynamic loa

    		•
  • Q : Medium-sized turbine How pressure of

    How pressure of oil is managed when starting or stopping the medium-sized turbine?

    		•
  • Q : Preventing the excess discharge pressure

    How we can prevent the excess discharge pressure?

    		•
  • Q : To designe pump how to design e gear

    how to design e gear pump. show the process.

    		•
  • Q : Problem on discharge head loss Water is

    Water is draining from the tank A to tank B. The elevation difference among the two tanks is 10 m. The pipe joining the two tanks has a sudden-expansion section as shown below. The cross-sectional area of the pipe from A is 8 cm2, and the area of the pipe f

    		•
  • Q : Mechanical design for manufacturing A

    A stone quarry in a remote part of the world requires that stone blocks of 3 cubic feet in volume be moved up a 50 ft long ramp which is inclined at 30 degrees. Since the location is remote, the blocks must be moved usng human power. On a continuous basis, human power

    		•
  • Q : Technology and Engineering Explain

    Explain difference between the Technology and Engineering?

    		•