--%>

Hard links

Explain the term hard links?

E

Expert

Verified

Hard links are those links that points directly to the physical file over the disk, and not upon the path name. This says that in case you rename or transfer the original file, link will not break, as the link is for file itself, not path where file is situated.

   Related Questions in Mechanical Engineering

  • Q : Product performance in Product design

    Product performance: Depending on the product, this may take many forms. Speed, loads to be withstood, number of work cycles, and intermittent or continuous working are some examples of considerations. 

  • Q : To designe pump how to design e gear

    how to design e gear pump. show the process.

  • Q : What is wrap-around Wrap-around : The

    Wrap-around: The main aim of a wrap-a-round is to make a straight line about a pipe to help in cutting the pipe to its appropriate length. It is employed mostly as a straight edge or a template.   

  • Q : Describe Process Flow Diagram Process

    Process Flow Diagram: A Process Flow Diagram or System Flow Diagram exhibits the relationships among the main components in the system. It too has fundamental information regarding the material balance for the process.

  • Q : Cavitation elimination by Pump How

    How Cavitation is eliminated by the Pump?

  • Q : Problem on flow rates Water flows at 40

    Water flows at 40 m/s from the jet of area of cross-section of 0.008 m2 on to a flat plate as shown in the figure. Determine the force F normal to the plate, and also the flow rates out of the plate.

    Q : Hydrostatic System Explain the term

    Explain the term Hydrostatic System?

  • Q : Life expectancy in Product design

    Life expectancy: This part of the specification will state how long the product should remain in working order provided the customer gives reasonable care and maintenance. Also take into account technological advances and ongoing improvements that wou

  • Q : Problem on head loss The pump

    The pump illustrated in the figure adds 20 kW of power to the flowing water. The only vital loss is that which takes place across the filter at the inlet of the pump. Find out the head loss for this filter. Note that the gage pressure upstream of the filter is negativ

  • Q : Mechanical design for manufacturing A

    A stone quarry in a remote part of the world requires that stone blocks of 3 cubic feet in volume be moved up a 50 ft long ramp which is inclined at 30 degrees. Since the location is remote, the blocks must be moved usng human power. On a continuous basis, human power