--%>
Assignment Help - homework help

Explain the term processors in an Embedded System

Explain the term processors in an Embedded System.

E

Expert

Verified

Processors in an Embedded System are as given below:

• General purpose processor, Microprocessor and Microcontroller
• Embedded processor and Digital signal processor
• Media processor, Application exact system processor
• Multiprocessor system by using ASSP and GPP
• ASIP core or GPP core integrated within either a VLSI or an ASIC circuit or an FPGA core integrated along with processor unit within a VLSI chip.

   Related Questions in Electrical Engineering

  • Q : Find out the number of turns of a coil

    A coil wound upon an air-filled former of length 10 centimeter is fed along with a current of 2 Amp. If the coil should produce a magnetic flux density of 0.1 Wbm-2 within the former, find out the number of turns needed.

    		•
  • Q : Classical scan designs Specify the

    Specify the different classical scan designs.

    		•
  • Q : Basic Ladder Logic Programming Read

    Read slides 05b spatially from slide 48 to slide 51. Complete signal grapgh on slide 48.

    		•
  • Q : Analysis on Wireless Technology 4. When

    4. When the bit rate of a message signal from the message sequence generator and the bit rate of a PN code from the multiple sequence generators are compared, which is higher? How did you compare them? Could you determine by how much the bit rate of one is higher?

    		•
  • Q : Prove phase shift is similar at pole

    The steady state transfer function of the certain electrode amplifier interface model demonstrated below is specified as: 1564_ste</span></p> </div> <!-- /comment-box --> </li> </td> </tr><tr> <td> <li> <div class=

    Q : What is noise margin Describe what do

    Describe what do you mean by the term noise margin?

    		•
  • Q : What are odd and even signals Explain

    Explain what are odd and even signals?

    		•
  • Q : Basic Neutralizer Control System See

    See the attachment Please write a report which includes:see the figures , and write3 pages 1) a short report that analyses the P&ID 2. A one paragraph introduction. 3. A paragraph about the process. 4. The instruments that are used (describe their tags following the slides). 5. Describe the co

    		•
  • Q : Define CMRR of recording system and

    The instrumentation amplifier demonstrated below is to be used such as the front-end phase of an ECG recording system. The ECG electrodes consist of a nominal impedance of 20k, along with a mismatch of up to 5k among them. All of the operational amplifiers include a m

    		•
  • Q : Digital Electronics Explain Digital

    Explain Digital Electronics. From where this word arise and what are their topics and terminology?

    		•