Analog and Digital filters
Explain the difference between analog and digital filters.
Expert
Analog :
a) It is constructed by using the active or passive components and it is explained by the differential equation. b) Frequency response may be altered by changing the components. c) It processes and generates the analog output. d) Output varies because of external conditions.
Digital :
a) It consists of the elements such as adder, subtractor and delay units and it is explained by the difference equation. b) Frequency response may be altered by changing the filter coefficients. c) Processes and produces the digital output. d) Not affected by the external conditions.
Describe the term IDMT relay?
The pole faces of a permanent magnet measure 100 millimeter high by 200mm wide. This is needed to acquire an acceleration of 10ms-2 of a single length of current-carrying conductor that weighs 250gm-1 and is positioned vertically inside the magnetic field, passing horizontal
Explain the term race condition.
Illustrates the steps in embedded system design? Answer: In embedded system there is need of following term: Requirements, Speci
List some of the methods that are used for CMOS to TTL interface?
Explain the role of moderator in the review process?
What do you mean by the term impulse response?
In the individual transistor inverter circuit demonstrated below, the input voltage is switched abruptly by Vcc to 0V. There base current as acquired from the Charge Control equations governing turn-off of the transistor is specified as:
A parallel R-L-C network is demonstrated in figure below, here the inductor is seem as non-ideal having the resistance, R, related with the winding. Verify an expression for the resonant frequency at that the impedance becomes purely real or say resistive in terms of
Describe the Level-Sensitive Scan Design and System-level busses.
18,76,764
1938477 Asked
3,689
Active Tutors
1430007
Questions Answered
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!