--%>
Assignment Help - homework help

Describe the term AM and FM

Describe in brief the term AM and FM.

E

Expert

Verified

AM: Amplitude modulation is a kind of modulation where the amplitude of the carrier signal is varied in accordance with information bearing the signal.

FM: Frequency modulation is a kind of modulation where the frequency of carrier signal is varied in accordance with the information bearing the signal.

   Related Questions in Electrical Engineering

  • Q : Phase modulation What is phase

    What is phase modulation?

    		•
  • Q : Checksum generation List out the steps

    List out the steps which are followed in the checksum generator?

    		•
  • Q : Determining internal resistance of

    A battery is joined to a resistive load and a current of 10mA flows by the load along with a voltage drop across this of 10V. While the load resistance is increased by 10 percent the load voltage increases by 1 percent. Determine the internal resistance of the battery

    		•
  • Q : MCB and MCCB Explain difference between

    Explain difference between the MCB & MCCB and where it is generally used?

    		•
  • Q : What do you mean by the term capacitor

    What do you mean by the term capacitor? Briefly describe it.

    		•
  • Q : Estimate minimum value of input

    The network demonstrated in figure presents the input of a biomedical amplifier, now the input impedance is seem purely resistive, R and a capacitor, C, is used to block dc.

    Q : Functions of port 3 of 8051 Explain the

    Explain the functions of the port 3 of 8051?

    		•
  • Q : Problem on electric power The sketch

    The sketch illustrates a common consumer product termed as Water Pik. This device uses a motor to drive a piston pump that produces a jet of water (diameter d = 3 mm, temperature T = 10 °C) with a speed of 25 m/s. Find out the minimum electric power in watts which is needed by the device.

    		•
  • Q : Define CMRR of recording system and

    The instrumentation amplifier demonstrated below is to be used such as the front-end phase of an ECG recording system. The ECG electrodes consist of a nominal impedance of 20k, along with a mismatch of up to 5k among them. All of the operational amplifiers include a m

    		•
  • Q : Circuits RLC resonant pls solve the

    pls solve the problems in the attached file pls provide all steps .mention all required laws applied while solving for capacitor value take 1989 nano farads for inductors value take 1708 micro henry

    		•