Designing the digital filter from analog filter
Explain how the digital filter is designed from the analog filter?
Expert
Digital filter is developed from the analog filter by using the following given methods:
a) Approximation of derivatives.
b) Impulse invariant method.
c) Bilinear transformation.
The pole faces of a permanent magnet measure 100 millimeter high by 200mm wide. This is needed to acquire an acceleration of 10ms-2 of a single length of current-carrying conductor that weighs 250gm-1 and is positioned vertically inside the magnetic field, passing horizontal
State briefly the term sampling theorem.
Explain the various types of Transparencies?
Draw an estimated input-output transfer characteristic for the loaded inverter circuit demonstrated below. Determine expressions for the output HI and LO logic voltages as well as the critical maximum input logic LO voltage ViL max. Obtain an expression for
Explain the meaning of the Power-on- Reset in 8051 controller?
Write down the priority modes within the 8259?
Explain the term CRC generator.
Sketch up a table demonstrating the states of conduction of each transistor within the TTL gate demonstrated below for all possible logic combinations of steady-state input states and therefore verify its logical function. Differentiate between reverse and forward mod
Explain why the input resistance of the op-amp is high while its output resistance is low?
Explain function of the anti-pumping within the circuit breaker?
18,76,764
1951568 Asked
3,689
Active Tutors
1452228
Questions Answered
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!