Response to the following:
It is required to design the circuit in Figure so that a current of 1 mA is established in the emitter and a voltage of -1 V appears at the collector. The transistor type used has a nominal β of 100. However, the β value can be as low as 50 and as high as 150. Your design should ensure that the specified emitter current is obtained when β=100 and that at the extreme values of β the emitter current does not change by more than 10% of its nominal value. Also, design for as large a value for RB as possible. Give the values of RB, RE, and RC to the nearest kilohm.
What is the expected range of collector current and collector voltage corresponding to tfull range of β values?
