The tensile force acting on the hatched area of the

Question

Question Manual

Question 1. In a two dimensional stress analysis, the state of stress at a point is shown below. If σ = 120 MPa and τ = 70 MPa, σ_x, and σ_y, are respectively,

Question 2. A beam with the cross-section given below is subjected to a positive bending moment (causing compression at the top) of 16 kN-m acting around the horizontal axis. The tensile force acting on the hatched area of the cross-section is

Question 3. If a beam of rectangular cross-section is subjected to a vertical shear force V, the shear force carried by the upper one-third of the cross-section is

Question 4. I-section of a beam is formed by gluing wooden planks as shown in the figure below. If this beam transmits a constant vertical shear force of 3000 N, the glue at any of the four joints will be subjected to a shear force (in kN per meter length) of

Question 5. The axial load (in kN) in the member PQ for the arrangement/assembly shown in the figure given below is _____.