The signal voltage at the detector’s output


20 SI fibers, 2 km long each, are spliced together for a 40 km link. Each fiber has a loss rate of 1-dB/km and a numerical aperture of 0.24. Each splice adds 0.5 dB of loss. A laser diode has a threshold current of 10 mA and emits at 3 mW/mA rate. A diode current of 15 + 3sin t (mA) produces an optical signal, which is coupled into this 40 km SI fiber. After 20-km propagation length, an erbium-doped fiber amplifier having a gain of 15 dB amplifies the signal before the signal is recorded by a photodetector at the end of this link. This photodector has a responsivity = 0.5 A/W and a load resistance of 100 . Two connectors are used and each one has 1 dB loss. Compute the signal voltage at the detector’s output.

Request for Solution File

Ask an Expert for Answer!!
Management Theories: The signal voltage at the detector’s output
Reference No:- TGS080568

Expected delivery within 24 Hours