Q. How to load DOS from Floppy Disk?
If DOS is not setup on the Hard Disk of your PC, or you want to load DOS from the Floppy disk drive due to any reason, follow these steps:
1. Put the DOS diskette in drive A:, Close the drive door if necessary.
2. Turn on the power ON/OFF switch of the CPU unit of your PC the power ON/OFF switch is generally located in the front or the rear of the CPU unit.
3. If your VDU display unit (Monitor) has an ON/OFF switch, turn that switch ON too.
Wait for some time your PC perform a Self Test and loads DOS.
Your monitor displays "A :\> "or "A>" and a DOS prompt message.