Install and configure medium size networks Assignment -
PART 1- IP Addressing:
1. What are the IPv4 address classes and why do we need the classes?
2. What is an IP network and what is an IP sub-network or subnet?
3. What is subnet mask and why do we need subnet mask?
4. What is the size of a subnet denoted with
a. /16 (e.g. 10.10.0.0/16):
b. /17:
c. /18:
d. /19:
e. /20:
f. /21:
g. /22:
h. /23:
i. /24:
j. /27:
k. /28
l. /29:
m. /30:
5. Subnet the following IP network: 172.1xy.0.0 (xy is two last digits of your student id) to accommodate 5 subnets, each subnet will subsequently have 400, 100, 50, 30 and 10 PCs.
PART 2 - Answer the following questions,
6. What is a routing metric?
7. What is the difference between static routing and dynamic routing?
8. What is the difference between distance-vector routing and link-state routing?
Complete the following tasks:
9. Design IP plan for the network.
10. Configure IP address for the PC and server.
11. Configure static routing for the network.
12. Configure RIPv2 for the network.
13. Configure OSPF for the network.
14. Show the routing table of each router.
15. Show the network connectivity pinging from PC0 to Server0.
PART 3 - You are hired by VIT to implement the network given in the diagram (in attached file).
The company has been allocated the following IPv4 address block to use: 172.1XY.0.0/20 (XY is the last two digits of your student ID).
To perform the task, you have to prepare the following documents:
a. IPv4 addressing plan
b. Write down the configuration command in Branch C router to statically route all traffic to HQ router.
c. Write down the configuration commands to enable IPv4 RIPv2 routing in HQ router.
Attachment:- Assignment File.rar