How a typical material property would change
With well illustrated diagrams, show how the microstructure of a typical metallic material would change during annealing. Indicate also, how a typical material property such as ductility would change correspondingly.
Expected delivery within 24 Hours
Why does necking occur during a tensile test? Use your knowledge of engineering stress and strain to explain the difference between the plots of true stress/true strain, and engineering stress/engineering strain, on the same scale.
Material A has a fracture toughness and yield stress ten times that of Material B a) Write an expression for the increase (change) in fracture stress of a part by using Material A instead of Material B.
What is creep failure? Is creep failure of a material a concern at high temperatures? If so why? Explain how creep failure could be minimized. Use well known case examples.
How is heat conducted in solids? Which mechanism would you expect to dominate thermal conductivity in Cu? Al2O3?
A ship prototype is expected to travel at a speed of 15 m/s in water. Unfortunately, there is no ability to test a 1/20th scale model in water, so it is tested in a wind tunnel. What air speed would be required to simulate the same speed on the p
Find the mean and the standard deviation for the population. Samples sizes of 2 will be drawn from the population. Use the answers in part a to calculate the expected value and the standard deviation of the sampling distribution of the sample mean.
In a gas turbine, natural gas (methane) and stoichiometric air flow into the combustion chamber at 1000kpa, 500K. Secondary air is also at 1000kpa, 500Kpa, is added right after the combustion to result in a product mixture temperature of 1500K.
Let P(x, y) be the probability of choosing an x-colored ball on the first draw and a y-colored ball on the second draw. Compute the probability for each outcome of the experiment. (Enter your answers as fractions.)
1959923
Questions Asked
3,689
Active Tutors
1450643
Questions Answered
Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!
A client has a habit of mouthbreathing involving teeth 13-23. The tissue is red, swollen with a loss of stippling in that area and the radiographs reveal
Is training for first responders (law enforcement) an adequate enough response to treat with cognitive impairments and other brain disorder
Question: What is the BEST indicator for diagnosis of implant failure? Question options: presence of mobility pain around the implant plaque
Home irrigation devices designed for targeting direct subgingival delivery have a positive effect on subgingival microorganisms at probing
A client presents with a lateral radiolucency on the mesial root of tooth 46. There is a 6 mm pocket in that location and bleeding on probing
The dental hygienist uses a handheld syringe to irrigate the posterior molars following a deep debridement of 6 mm pockets.
Question: A client is using a toothpaste with postassium nitrate. What is the role of the potassium nitrate in this toothpaste?