Assignment:
The weight of connecting rods used in an automobile engine is to be closely controlled to minimize vibrations. The specification is that each rod must be 974 + 1.2 grams. The half-width of the specified interval, namely, 1.2 grams, is known as the tolerance. The manufacturing process at a plant produces rods whose weights are normally distributed with a mean µ of 973.8 grams and a standard deviation σ of 0.32 grams.
a. What proportion of the rods produced by this process will be acceptable according to the specification?
b. The process capability index, denoted by Cp , is given by the formula
Cp = Tolerance / 3 * σ
Calculate Cp for this process.
c. Would you say a larger value or a smaller value of Cp is preferable?
d. The mean of the process is 973.8 grams, which does not coincide with the target value of 974 grams. The difference between the two is the offset, defined as the difference and therefore always positive. Clearly, as the offset increases, the chances of a part going outside the specification limits increase. To take into account the effect of the offset, another index, denoted by Cpk , is defined as
Cpk = cp - offset / 3 * σ .Calculate Cpk for this process.
e. Suppose the process is adjusted so that the offset is zero, and σ remains at 0.32 gram. Now, what proportion of the parts made by the process will fall within specification limits?
f. A process has a Cp of 1.2 and a Cpk of 0.9. What proportion of the parts produced by the process will fall within specification limits?
Your answer must be typed, double-spaced, Times New Roman font (size 12), one-inch margins on all sides, APA format and also include references.