Assignment: VHDL
1- Use modular design to combine your seven-segment display and numeric function circuit
Lastly, it would be really convenient to implement your numeric function on the FPGA board and use the seven-segment display decoder you created from task 1 in the picture below. Luckily, this is possible. Follow these steps:
a- Use your current project and create a new VHDL design module to implement this circuit using VHDL. In this module, you will use port map statements to include your designs from tasks 1 and 2.(in the attachment below task one and two.) Use VHDL signals to connect these two components together. Do not create a new module that implements this design without using port map statements.
b- Create a VHDL test bench and test your output for all possible input signal combinations. Simulate your design and verify the outputs from your numeric function and your sevensegment decoder.
c- Implement your circuit on the FPGA board. Connect the input of your numeric function "x" to four switches and connect the output bus to the seven cathodes for the numeric segments. Verify that your circuit operates correctly on the FPGA board.
d- Ask the instructor to check the design and FPGA board implementation of your circuit.
Attachment:- Attachments.rar