Estimate the mass of the gas in the tank, Mechanical Engineering

+44 141 628 6080
[email protected]

Estimate the mass of the gas in the tank

A storage tank holds 75 cubic meters of a gas at 28deg C and a pressure of 130kPa. The gas appears to have a molecular weight of 30 from tests run in a laboratory. Estimate the mass of the gas in the tank in kg assuming the gas behaves as an ideal gas. If the gas warms up to 35 deg C as it sits in the sun all day, what would the pressure rise to?

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Estimate the mass of the gas in the tank

Reference No:- TGS0428523

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : Consider the component values

Use MultiSim (or Matlab) to calculate the output signal, V, shown in fig. 3, use eq. 2 for your calculations. Consider the component values given in 2.1. Set the frequency of the input voltage as shown in Table 1 and record the amplitude of the ou

Q : Calculate the power in each resistor

1) Three resistors R1, R2 and R3 are connected in series and a supply voltage of 240 V. If R2 = 2R1, R3 = 3R1 and the total power taken by the circuit is 480 watts. Calculate the power in each resistor?

Q : Determine the cooling water inside pipe diameter required

A Rankine cycle is to drive an electric generator to produce 600 MW of electricity. The generator is 95% efficient. The boiler is producing steam at 1450 psi and 900 deg F.

Q : This value without computing the inverse

Use MATLAB to compute the inverse Laplace transform of X(s)=(s^2+2s+1)/(s(s+1)(s^2+10s+50)) and determine the value of x(t) in the steady state. How would you be able to obtain this value without computing the inverse? Explain.

Q : Estimate the mass of the gas in the tank

A storage tank holds 75 cubic meters of a gas at 28deg C and a pressure of 130kPa. The gas appears to have a molecular weight of 30 from tests run in a laboratory.

Q : Experiment on loadtest on dcshunt generator

While doing experiment on loadtest on dcshunt generator,what happens when dc shunt generator is replaced by dc compound generator?

Q : The oxygen is at a fairly constant pressure

Oxygen is flowing through a nominal 2 inch schedule 40 steel pipe pipe at a velocity of 10 ft/s. The oxygen is at a fairly constant pressure of 50 psia and at a temperature of 90 deg F.

Q : Synchronous motor has an applied line voltage

A four pole, 60Hz, 50 hp synchronous motor has an applied line voltage of 480 volts and draws 60A from the line. it is operated at a power factor of .90. the motor rotor rotates at 1800 rmp at full load .What is the motor efficiency as operat

Q : How is the solubility of manganese sulfide affected

How is the solubility of manganese(II) sulfide affected by the addition of aqueous potassium hydroxide to the system?

1945502

Questions
Asked

3,689

Active Tutors

1449976

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Estimate the mass of the gas in the tank

Reference No:- TGS0428523

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : Consider the component values

Q : Calculate the power in each resistor

Q : Determine the cooling water inside pipe diameter required

Q : This value without computing the inverse

Q : Estimate the mass of the gas in the tank

Q : Experiment on loadtest on dcshunt generator

Q : The oxygen is at a fairly constant pressure

Q : Synchronous motor has an applied line voltage

Q : How is the solubility of manganese sulfide affected

How ensure that the youth understand what study involves

Problem concerning consensual sexual relationship

Problem regarding the america youth and social media

Why you feel unpleasantly hot and sweaty

How we perceive objects in the real world

Discuss three ethical guidelines that are important

How do you define being an adult

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Estimate the mass of the gas in the tank

Reference No:- TGS0428523

Recent Questions Asked Mechanical Engineering

Q : Consider the component values

Q : Calculate the power in each resistor

Q : Determine the cooling water inside pipe diameter required

Q : This value without computing the inverse

Q : Estimate the mass of the gas in the tank

Q : Experiment on loadtest on dcshunt generator

Q : The oxygen is at a fairly constant pressure

Q : Synchronous motor has an applied line voltage

Q : How is the solubility of manganese sulfide affected

Asked Questions