Draw or sketch an isometric view depicting general brick

Question

3. Draw or sketch an isometric view depicting general brick veneer wall construction, brick garage wall construction with attached piers (single skin) and timber framed/timber clad wall construction.

4. Produce detailed orthographic sectional details of the following:

a. Awning type timber window fixed into timber clad wall

b. Double-hung timber window fixed into a veneer wall (include all flashings where required)

5. Using single line drawings depict at least six different shaped roof trusses. Draw a section through a typical pitched roof truss outlining all members. Produce a truss layout for a hipped roof on a given floor plan. Sketch the following details in three dimensions - truss to external wall top plate fixing and truss to internal wall top plate connection.

6. Sketch or draw to scale four different eaves details - two for timber clad construction and two for brick veneer construction.

7. Sketch three different types of timber wall claddings (or similar) with specific fixing details. Sketch three common roof claddings (one must be tiles) also with specific fixing details.

8. Sketch three methods of detailing a roof gutter on a boundary wall.

9. Draw or sketch three approved methods of Termite Management Systems for the following (one for each)

a. Timber clad construction

b. Brick veneer construction

c. Double brick construction

11. Write a brief report outlining all services that are included in a new residential dwelling. Include who installs such services.

Answer 1

Make sure to properly read all the questions illustrated below and answer them in a detailed manner by following MLA formatting. 1) Draw or sketch the isometric view showing general brick veneer wall construction, brick garage wall construction having attached piers (that is, single skin) and timber framed or timber clad wall construction. 2) Generate detailed orthographic sectional details of the given: a) Awning kind timber window fixed to timber clad wall. b) Double-hung timber window fixed to the veneer wall (comprise all flashings where needed). 3) By using single line drawings show at a minimum of six different shaped roof trusses. Sketch a part via a typical pitched roof truss outlining all the members. Generate a truss layout for a hipped roof on a particular floor plan. Draw the given details in 3-dimensions - truss to external wall top plate fixing and truss to the internal wall top plate connection.