Determining phase lag


Assignment:

Question 1. The midrange open gain of a certain op-amp is 100,000. If the open loop critical frequency is 75 Hz, what is the open loop gain at 1 KHz?

Question 2. A certain op-amp has three internal amplifier stages with the following gains and critical frequencies: A1 = 50 dB at f1 = 1000Hz, A2 = 70 dB at f2 = 100Hz, A3 = 30 dB at f3 = 25,000Hz. Determine the open loop midrange dB gain.

Question 3. For the op-amp in problem 2, determine the phase lag when f = f1.

Question 4. The op-amp in figure 1 has a unity-gain bandwidth of 3 MHz and the RF = Find the bandwidth.100Kohms and Ri = 5Kohms.  Please note that these figures will be used for the remainder of the exam questions.

Question 5. The op-amp in figure 2 has a unity-gain bandwidth of 3 MHz and the RF = Find the bandwidth.200Kohms and Ri = 4Kohms

Question 6. Using figure 3 find the output voltage if the 3 input voltages are 1V, 2V, and 3V (starting with the top resistor and going down) and RF = 15Kohms

Question 7. Using figure 3 with RF = 15 kohms and 3 input voltages are 1V, 2V, and 3V (starting with the top resistor and going down) find the current through RF.

Question 8. A low pass filter has a critical frequency of 1kHz. What is its bandwidth?

Question 9. A high pass filter has a R = 3kohms and C = 0.0020microF. What is its critical frequency?

Question 10. What is the roll-off rate of a 3rd order low pass filter?

141_Figure.jpg

Solution Preview :

Prepared by a verified Expert
Electrical Engineering: Determining phase lag
Reference No:- TGS01897494

Now Priced at $50 (50% Discount)

Recommended (92%)

Rated (4.4/5)