A laminated thick-walled hydraulic cylinder was fabricated by shrink-fitting a steel (E = 200 GPa and v = 0.30) jacket having an outside diameter of 300 mm onto a steel tube with an inside diameter of 100 mm and an outside diameter of 200 mm. The interference was 0.15 mm. Determine the interfacial contact pressure. Determine the maximum tensile stress in the laminated cylinder resulting from the shrink fit. Determine the maximum tensile stress in the laminated cylinder after an internal pressure of 200 MPa is applied. Compare the stress distribution in the laminated cylinder with the stress distribution in a uniform cylinder for an internal pressure of 200 MPa.