Question:
Considering the Effect of Faults
Describe the effect that a single stuck-at-0 fault (i.e., regardless of what it should be, the signal is always 0) would have for the signals shown below, in the single-cycle datapath in Figure 5.17 . Which instructions, if any, will not work correctly? Explain why.
Consider each of the following faults separately:
a. RegWrite = 0
b. ALUop0 = 0
c. ALUop1 = 0
d. Branch = 0
e. MemRead = 0
f. MemWrite = 0.
Attachment:- Effect of faults.rar