Build a home security system circuit using this program. The system must include 2 door sensors, 3 window sensors, 2 smoke detectors, 2 water leak sensors, and 2 motion detectors. All of these sensors will be wired to a main panel. There also must be a keypad which is wired to the main panel. In the event that any of the sensors are triggered, a signal will go through to the main panel. The main panel in turn will send a signal to a siren activating a loud wailing noise. The family member must first enter a code into the key pad in order to be able to arm the sensors throughout the home (and disarm as well). Once the command is made to arm the sensors, there will be a period of 15 seconds until the sensors are active.