Analysis of digitally sampled pcm audio signal


Assignment:

An audio signal has a frequency range from 50 Hz to 20 kHz. The signal is sampled, digitized and recorded on magnetic tape as a PCM signal.

a. Assuming that ideal filters are available, what is the lowest frequency at which the signal can be sampled and subsequently recovered in its analog form without distortion using a low pass filter?
b. The audio signal is sampled at a frequency of 50 kHz and converted to a serial bit stream using a 12 bit analog to digital converter (ADC). What is the bit rate of the digital signal that is recorded on the magnetic tape?
c. When the analog signal is recovered, aliasing can occur if the low pass filter in the receiver is not correct. What specific criterion must the low pass filter meet to avoid aliasing?
d. The digital signal is replayed on a magnetic tape player and converted back to an analog signal using a digital to analog converter. What is the quantization signal to noise ratio (SNR) of the analog signal?

Provide complete and step by step solution for the question and show calculations and use formulas.

Solution Preview :

Prepared by a verified Expert
Electrical Engineering: Analysis of digitally sampled pcm audio signal
Reference No:- TGS01897367

Now Priced at $30 (50% Discount)

Recommended (95%)

Rated (4.7/5)