After sliding across the horizontal surface the block of, Physics

+44 141 628 6080
[email protected]

After sliding across the horizontal surface the block of

(a) After sliding across the horizontal surface, the block of mass M collides elastically with a vertical rod of length R and mass MR that is pivoted at the upper end. The block immediately stops, and the rod swings without resistance to a maximum angle of ?0. This can occur only for a very specific rod mass- what is that mass? In other words, what must be the mass of the rod, MR, in terms of the mass of the block, M, such that the speed of the block is zero immediately after the collision?

(b) What is the maximum displacement angle ?0?

(c) After reaching ?0, the rod swings back and strikes the block, sending it back along its way. What is the angular speed of the rod after this second elastic collision? What is the speed of the block, v4? How much elapses between these two collisions?

View Complete Question

Request for Solution File

Ask an Expert for Answer!!

Physics: After sliding across the horizontal surface the block of

Reference No:- TGS0604566

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Physics

Q : For a 12-bit linear pcm code with a resolution of 002 v

For a 12-bit linear PCM code with a resolution of 0.02 V, determine the voltage range that would be converted to the following PCM codes. (a) 1 0 0 0 0 0 0 0 0 0 0 1 (b) 0 0 0 0 0 0 0 0 0 0 0 0

Q : What is the accounting break-even level of output for this

What is the accounting break-even level of output for this project? What is the degree of operating leverage at the accounting break-even point? How do you interpret this number?

Q : Mars has a mass of 641023 kg and radius of 3400000 m find

Mars has a mass of 6.4*10^23 kg and radius of 3,400,000 m. find the acceleration due to the gravity on Mars

Q : A micro-law compression encoder has vimax 8 v vimax 1v

A µ-law compression encoder has: Vi(max) = 8 V, vi(max) = 1V, µ = 255 Determine the output voltage for an input voltage of 2 V.

Q : After sliding across the horizontal surface the block of

After sliding across the horizontal surface, the block of mass M collides elastically with a vertical rod of length R and mass MR that is pivoted at the upper end. What is the maximum displacement angle

Q : If globally averaged dry and wet deposition rates for so2

If globally averaged dry and wet deposition rates for SO_2 are 1.0kg/ha/yr and 5.0kg/ha/yr, respectively, then what is the lifetime of SO_2 due to the combined processes of wet and dry deposition? Assume temperature and pressure are 20*C and 1atm

Q : A six pole 40 kw 400 v dc motor draws 110 a from the supply

A six pole, 40 kW, 400 V d.c. motor draws 110 A from the supply. The shunt field resistance is 200 Ohm and the armature resistance is 0.5 Ohm. The armature is wave wound with 600 conductors operates at a speed of 1200 rev/min when supplying full l

Q : Three amplifiers with power gains of 15 22 and 7 are

Three amplifiers with power gains of 15, 22, and 7 are cascaded. The input power is 120 µW. What is the output power of the final amplifier stage

Q : You have two capacitors one with capacitance 123 times 10-6

You have two capacitors, one with capacitance 12.3 × 10-6 F and the other of unknown capacitance. obtain its capacitance

1942607

Questions
Asked

3,689

Active Tutors

1460556

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Physics: After sliding across the horizontal surface the block of

Reference No:- TGS0604566

Have a Question? (oR Write a Review)

Recent Questions Asked Physics

Q : For a 12-bit linear pcm code with a resolution of 002 v

Q : What is the accounting break-even level of output for this

Q : Mars has a mass of 641023 kg and radius of 3400000 m find

Q : A micro-law compression encoder has vimax 8 v vimax 1v

Q : After sliding across the horizontal surface the block of

Q : If globally averaged dry and wet deposition rates for so2

Q : A six pole 40 kw 400 v dc motor draws 110 a from the supply

Q : Three amplifiers with power gains of 15 22 and 7 are

Q : You have two capacitors one with capacitance 123 times 10-6

Problem regardig great war

Illustrate political analysis of west africa

Discuss limited government role in speculative assets

Describe how the work from all hands and hearts connects

Brainstorming blows manfred von richthofens flying circus

Develop an email asking them

What was this peculiar sensation

Request for Solution File

Ask an Expert for Answer!!

Physics: After sliding across the horizontal surface the block of

Reference No:- TGS0604566

Recent Questions Asked Physics

Q : For a 12-bit linear pcm code with a resolution of 002 v

Q : What is the accounting break-even level of output for this

Q : Mars has a mass of 641023 kg and radius of 3400000 m find

Q : A micro-law compression encoder has vimax 8 v vimax 1v

Q : After sliding across the horizontal surface the block of

Q : If globally averaged dry and wet deposition rates for so2

Q : A six pole 40 kw 400 v dc motor draws 110 a from the supply

Q : Three amplifiers with power gains of 15 22 and 7 are

Q : You have two capacitors one with capacitance 123 times 10-6

Asked Questions