1. A 2.5-kg ball and a 5.0-kg ball have an elastic collision. Before the collision, the 2.5-kg ball was at rest and the other ball had a speed of 3.5 m/s. What is the kinetic energy of the 2.5-kg ball after the collision?
2. A 50-kg rider on a moped of mass 75 kg is travelling with a speed of 20 m/s. Each of the two wheels of the moped has a radius of 0.2 m and a moment of inertia of 0.2 kg.m2. What is the total rotational kinetic energy of the wheels?
3. A 1.0-kg wheel in the form a solid disk rolls along a horizontal surface with a speed of 6.0 m/s. What is the total kinetic energy of the wheel?
4. A 2.0-kg solid cylinder of radius 0.5 m rotates at a rate of 40 rad/s about its cylindrical axis. What power is required to bring the cylinder to rest in 10 s?
5. A solid cylinder of radius 0.35 m is released from rest from a height of 1.8 m and rolls down the incline as shown. What is the angular speed of the cylinder when it reaches the horizontal surface?
6. A ceiling fan has five blades, each with a mass of 0.34 kg and a length of 0.66 m. The fan is operating in its 'low' setting at which the angular speed is 9.4 rad/s. If the blades can be approximated as uniform thin rods that rotate about one end, what is the total rotational kinetic energy of the five blades?
7. A spring required a force of 1.0 N to compress it 0.1 m. How much work is required to stretch the spring 0.4 m?
8. A spring with constant k = 40.0 N/m is at the base a frictionless, 30.0 degrees inclined plane. A 0.50-kg block is pressed against the spring, compressing it 0.20 m from its equilibrium position. The block is then released. If the block is not attached to the spring, how far along the incline will it travel before it stops?
9. A ping-pong ball weighs 2.5*10^-2 N. The ball is placed inside a cup that sits on top of a vertical spring. If the spring is compressed 0.055 m and released, the maximum height above the compressed position that the ball reaches is 2.84 m. Neglect air resistance and determine the spring constant.
10. The spring constant for the spring in a special cannon is 1800 N/m. In cocking the cannon, the spring is compressed 0.55 m. What is the initial speed of a 7.0 kg cannon ball at rest on the free end of spring when it released?