Multiple-Choice Questions:
1. Which of the following is NOT a feature of an Intranet?
A. uses Internet based standards, such as HTML and SMTP
B. is used to connect both local and remote sites into one network
C. is used to distribute content to the general Internet
D. can be effectively managed
2. Which of the following does distributed processing typically not support?
A. applications
B. device controller
C. data
D. mainframes
3. Which of the following is NOT a benefit of distributed data processing?
A. increased responsiveness to organizational needs
B. better correspondence to organizational patterns
C. greater user involvement and control
D. enhanced centralization of data definitions
4. Which of the following is not a function provided by servers in client/server systems?
A. printing services
B. data entry
C. database services
D. gateways
5. The three ways of organizing data for use by an organization are:
A. centralized, replicated, and partitioned
B. centralized, structured, and partitioned
C. structured, replicated, and partitioned
D. centralized, replicated, and structured
6. A data center can occupy:
A. a single room in a building
B. one or more floors
C. an entire building
D. all of the above
7. A DDP facility may include:
A. a central data center
B. satellite data centers
C. a community of peer computing facilities
D. all of the above
8. Which of the following is NOT a requirement for the Corporate Computing Function?
A. provide computing services in a reliable, professional, and technically competent manner
B. deploying technology in ways that make the work productive and not be concerned about whether or not the technology makes work enjoyable for employees
C. provide computing capabilities to all organizational units that need them
D. assist in satisfying the special computing needs of user departments
9. Which of the following is common in today's data centers?
A. redundant/backup power supplies
B. environmental controls
C. data communication connections
D. all of the above
10. No redundancy guarantees for servers, storage systems, network equipment, and communication connections to Internet or other networks; single path for power and cooling distribution; no redundant components; and availability: 99.671% are ____ characteristics of data centers.
A. Tier 1
B. Tier 2
C. Tier 3
D. Tier 4
11. Analog signals are:
A. continuous
B. discrete
C. discontinuous
D. all of the above
12. Digital signals are:
A. continuous
B. discrete
C. discontinuous
D. none of the above
13. In modern communication systems, data is sent from one point to another via:
A. input data
B. alternating current (A/C)
C. pressure changes
D. electromagnetic signals
14. One of the main differences between amplifiers and repeaters is that:
A. amplifiers forward noise as well as data
B. amplifiers clean the signal and then forward it
C. amplifiers increase the amount of attenuation
D. amplifiers focus primarily on digital signals
15. An encoding scheme is used:
A. in digital transmission to map binary digits to signal elements
B. in analog transmission to clean up the quality of the transmission
C. to help minimize errors
D. all of the above
16. Each signal change or element is called a:
A. bit
B. byte
C. baud
D. signal
17. If a carrier wave is modulated with 4 amplitudes and 4 phase changes, how many possible signal combinations are there?
A. 4
B. 8
C. 16
D. 32
18. A carrier wave is modulated with 4 amplitudes and 4 phase changes; how many bits can be represented with each signal change?
A. 1
B. 2
C. 3
D. 4
19. In Non Return to Zero encoding schemes, the signal or voltage level does not return to 0v (zero volts); one of the problems with this type of encoding is that:
A. it is sometimes difficult to synchronize the timing of the transmitter and the receiver
B. it does not work well with serial communications
C. the signal ground of the transmitter is often different from that of the receiver
D. it works only for analog signals
20. Asynchronous transmission includes a start and stop bit with each character transmitted to ensure:
A. that the total number of bits is a factor of 10
B. to allow a continuous stream of data
C. to prevent single bit errors from occurring
D. to allow the receiver to maintain synchronization with the sender
21. A paradigm for electronic communications where a dedicated path is opened and maintained during the exchange is called .
A. message switching
B. circuit switching
C. packet switching
D. data switching
22. A paradigm for electronic communications where messages are split into blocks of data with limited size, which are then transmitted one-by-one across the network is called _____ .
A. message switching
B. circuit switching
C. packet switching
D. data switching
23. The first two important applications developed for the ARPANET were:
A. Telnet and FTP
B. Telnet and email
C. FTP and email
D. email and world-wide-web
24. The first "killer application" for the ARPANET was ______.
A. Telnet
B. FTP
C. email
D. remote login
25. The development of an internationally distributed collection of multimedia files addressed using universal resource locators led to the:
A. Telnet package
B. email system
C. world-wide-web
D. FTP package
26. The problem of using IP numbers for addressing hosts in the Internet are resolved using ______.
A. the concept of domains and the use of domain names
B. the use of Telnet applications
C. the use of email servers
D. splitting IP addresses into four octets
27. The Domain Name System (DNS) is comprised of four elements; which of the following is NOT one of these elements?
A. DNS database
B. IP addresses
C. name servers
D. resolvers
28. The key features of the DNA database are:
A. variable-depth hierarchy for names, distributed databases, and name servers
B. resolvers, distributed databases, and name servers
C. distribution controlled by the database, resolvers, and distributed databases
D. variable-depth hierarchy for names, distributed databases, and distribution controlled by the database
29. _____ is telecommunications equipment that is located on the customer's physical location rather than on the provider's premises or in between.
A. CPE
B. ISP
C. CO
D. IXP
30. A company that provides other companies or individuals with access to, or presence on, the Internet is a(n) _ _ .
A. point of presence
B. ISP
C. network service provider
D. central office
31. The TCP/IP architecture contains _____ layers.
A. two
B. three
C. four
D. five
32. Wireless networking brings:
A. increased security risks
B. management headaches
C. increased demands on support staff
D. all of the above
33. _____ is a Cisco proprietary product.
A. VoIP
B. SKINNY
C. SMTP
D. SIP
34. The key elements of a protocol are:
A. syntax, structure, timing
B. syntax, semantics, timing
C. structure, semantics, format
D. format, syntax, semantics
35. Which of the following is a commonly used set of standards for computer communications?
A. SLA
B. ISO
C. POP
D. TCP/IP
36. A device that connects networks with differing addressing schemes, packet sizes and interfaces is called a _ _ _.
A. hub
B. router
C. switch
D. repeater
37. The current IP specification uses addresses to identify hosts that consist of:
A. 16 bits
B. 64 bits
C. 32 bits
D. 128 bits
38. The newer IPv6 specification uses addresses to identify hosts that consist of:
A. 128 bits
B. 64 bits
C. 32 bits
D. 16 bits
39. The ______ layer is concerned with the exchange of data between a computer and the network to which it is attached.
A. transport
B. application
C. network access
D. physical
40. The ______ layer contains the logic needed to support the various user applications.
A. network access
B. physical
C. application
D. transport.