Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Solved Assignments
Asked Questions
Answered Questions
What relative junction areas should these diodes have if their currents must have binary-weighted ratios, with the smallest being 0.1 mA?
What value of V results? To obtain a value for V of 60 mV, what current I2 is needed?
Using the constant-voltage-drop (VD = 0.7 V) diode model, find the voltages and currents indicated.
Discuss Understanding major applications of Microbiology in the Industrial World. The response/answer should be typed, single spaced,
Analytically, find the voltage corresponding to your estimate of current. By how much does it differ from the graphically estimated value?
What do you expect the voltages VR1 and V2 to become at 0°C and at 40°C?
A designer of an instrument that must operate over a wide supply-voltage range, noting that a diode's junction-voltage drop is relatively independent .
What is the apparent rise in junction temperature? What is the power dissipated in the diode in its final state?
A "1-mA diode" (i.e., one that has vD =0.7 V at iD = 1 mA) is connected in series with a 500O resistor to a 1.0 V supply.
Assuming the availability of diodes for which vD = 0.75 V at iD = 1 mA, design a circuit that utilizes four diodes connected in series.
What two current estimates would result from the use of the two values of VD? What is their percentage difference?
Suggest a combination of series and parallel diodes that will do the job as well as possible.
Assuming that the diodes in the circuits of Figure are deal, find the values of the labeled voltages and currents.
The connection is between the diode cathode and the positive terminal of the battery and the anode and the positive terminal are connected?
What are its positive and negative peak values? =positive terminal are connected?
If the peak value of vI is reduced by 10%, what do the peak and average values of iB become?
What logic function is X of A and B? What logic function is Y of A and B?
Find a suitable value for R so that the current required from each of the input signal sources does not exceed 0.2 mA.
The venin's theorem to simplify the circuits and thus find the values of the labeled currents and voltages.
What is the greatest reverse voltage that will appear across the diode?
For the case Rs =R and assuming the diode to be ideal, sketch and clearly label the transfer characteristic vO versus vI .
What is the peak output voltage that results? What is the average output voltage that results?
What peak-to-peak sine-wave voltage is required? What resistance is required? What peak diode current flows?
At any moment, the input has one of three values: +3 V, 0 V, -3 V. What is the status of the lamps for each input value?