--%>
Assignment Help - homework help

What is NOR flash

Explain the term NOR Flash? Describe in detail.

E

Expert

Verified

NOR flash memory refers to the type of non-volatile storage technology which does not need the power to retain the data. NOR flash is faster, however it is also more expensive and takes longer time to erase and write down the new data. The NOR is often used within the mobile phones. NOR flash has an SRAM interface which involves sufficient address pins to map the whole chip, allowing for access to each byte stored inside it.

   Related Questions in Electrical Engineering

  • Q : Explain Real Time Clock and Timers in

    Explain Real Time Clock and Timers in embedded system.

    		•
  • Q : Complexity of deriving test of circuit

    Explain the factors which measures the complexity of deriving the test of circuit?

    		•
  • Q : Calculate torque developed in pump and

    The motor within an automobile water pump draws a power of 10 Watt from the 12Volt battery. The permanent magnets of the stator produce a complete magnetic flux of 0.05Wb. The rotor former of a length of 8cm, a diameter of 5cm and the armature winding has 20 conductin

    		•
  • Q : What do you mean by the term CMRR What

    What do you mean by the term CMRR? Describe in brief.

    		•
  • Q : Computing power in hydraulic turbine

    The engineer is making an estimation for a home-owner. The owner has a small stream (Q = 1.4 cfs, T = 40°F) which is located at an elevation of H = 34 ft above the owner’s residence. The owner is proposing to dam the stream, diverting the flow via a pipe (pe

    		•
  • Q : Why resistance contains color code

    Resistance containing color code: It has color code because there are several resistances in circuit and if anyone will be burn then after dis-soldering. we can distinguish the resistance value easily by color code. Now a day in resistance it has writ

    		•
  • Q : Differentiates synchronous and

    Illustrates the differences between synchronous and iso-synchronous communication?

    		•
  • Q : What do you mean by the term Biasing

    What do you mean by the term Biasing?

    		•
  • Q : Estimate value-direction of currents

    The currents demonstrated in figure in below have the magnitudes as given here:  I1 = 1mA, I2 = 3.5mA, I3 = 2I4, I5 = 2mA, I6 = 0.5mA.

    Q : Determining internal resistance of

    A battery is joined to a resistive load and a current of 10mA flows by the load along with a voltage drop across this of 10V. While the load resistance is increased by 10 percent the load voltage increases by 1 percent. Determine the internal resistance of the battery

    		•