--%>
Assignment Help - homework help

Illustrates the Specification of embedded system

Illustrates the Specification of embedded system?

E

Expert

Verified

Specification:

  • This serves like the contract in between the architecture and the customer.
  • Such specifications should be carefully written so that this reflects the customer’s requirements and this helps throughout design.
  • Designers who lack a clear concept what to build undergo a faculty assumption untimely in the process.
  • Specification should be understandable
  • Unclear specification will cause various types of problems.

Illustration for specification is: GPS system

   Related Questions in Electrical Engineering

  • Q : Find current in conductor of permanent

    The pole faces of a permanent magnet measure 100 millimeter high by 200mm wide. This is needed to acquire an acceleration of 10ms-2 of a single length of current-carrying conductor that weighs 250gm-1 and is positioned vertically inside the magnetic field, passing horizontal

    		•
  • Q : Properties of FIR filter Explain some

    Explain some of the properties of FIR filter? Specify the condition upon the FIR sequence h (n) which are to be imposed and order that this filter is termed as the liner phase filter?

    		•
  • Q : Describe rationale of design approach

    A driver circuit is needed to operate the solenoid that controls the flow-valve within an effluent disposal system. There valve opens while the solenoid is activated upon receipt of an active-high input control pulse, consisting of a minimum level of ½ of the s

    		•
  • Q : Elementary signals Explain the term

    Explain the term elementary signals and list them?

    		•
  • Q : Surge and lightning arrestor State the

    State the difference between the surge arrestor and the lightning arrestor?

    		•
  • Q : Determine expressions for the output HI

    Draw an estimated input-output transfer characteristic for the loaded inverter circuit demonstrated below. Determine expressions for the output HI and LO logic voltages as well as the critical maximum input logic LO voltage ViL max. Obtain an expression for

    		•
  • Q : What is Predictive model Explain the

    Explain the term Predictive model. Discuss it in detail. Also specify the data mining tasks which belong to the predictive model.

    		•
  • Q : Operating mode 0 of 8051 serial port

    Explain what is operating mode 0 of 8051 serial port?

    		•
  • Q : Explain RAM processor and the data

    Explain RAM processor and the data types supported by it.

    		•
  • Q : Explain requirements and

    Explain the requirements and characteristics of embedded system?

    		•