Mean and standard deviation of the total thickness, Basic Statistics

+44 141 628 6080
[email protected]

Mean and standard deviation of the total thickness

A plastic casing for a magnetic disk is composed of two halves. The thickness of each half is normally distributed with a mean of 1.5millimeters and a stantard deviation of 0.1 millimeter, and the halves are independent.

a) Determine the mean and standard deviation of the total thickness of the two halves.

b) What is the probability that the total thickness exceeds 3.3millimeters?

Request for Solution File

Ask an Expert for Answer!!

Basic Statistics: Mean and standard deviation of the total thickness

Reference No:- TGS0750854

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Basic Statistics

Q : How many metric tons of calcium sulfate would be produced

One way to reduce the formation of acid rain involves trapping the SO2 by passing smokestack gases through a spray of calcium oxide and O2. The product of this reaction is calcium sulfate.

Q : Velocity of both travelers as a function of time

Graph the velocity of both travelers as a function of time up to t=16 seconds starting at time t=0 when desi leaves the classroom. Use a solid line for desi;s velocity and a dashed line for carmelas velocity.

Q : What you would observe as a piece of iron rusts

Write a balanced equation that shows the reaction of iron with oxygen to form iron oxide, which may be written Fe2O3. Then write a description of what you would observe as a piece of iron rusts.

Q : What height does the ball reach

A cannon barrel is elevated at an angle of 45°. It fires a ball with a speed of 326 m/s. (For the following questions, ignore air resistance.) (a) What height does the ball reach?

Q : Mean and standard deviation of the total thickness

Q : Determine the maximum height of the projectile

A projectile is launched from ground level with an initial speed of 54.2 m/s. Find the launch angle (the angle the initial velocity vector is above the horizontal) such that the maximum height of the projectile is equal to its horizontal range. (I

Q : Determine the charge density of each face of the plate

A square plate of copper with .5m sides has no net charge and is placed in a region of uniform electric field of 80.0 kN/C directed perpendicularly to the plate. Find (a) the charge density of each face of the plate and (b) the total charge on eac

Q : What is the concentration of trichloroethylene in the water

A .21 m^3 drum contains 100L of a mixture of several degreasing solvents in water. The concentration of trichloroethylene in the headspace (gas phase) above the water was measured to be .00301 atm.

Q : Equation for the acceleration due to gravity

Consider the equation for the acceleration due to gravity, G ,given in Section 3-12.3 (Use propagation of error (delta method)). Suppose that E(T) = 5.2 seconds and V(T) = 0.0004 square second . Computer the mean and variance of G.

1927880

Questions
Asked

3,689

Active Tutors

1434729

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Basic Statistics: Mean and standard deviation of the total thickness

Reference No:- TGS0750854

Have a Question? (oR Write a Review)

Recent Questions Asked Basic Statistics

Q : How many metric tons of calcium sulfate would be produced

Q : Velocity of both travelers as a function of time

Q : What you would observe as a piece of iron rusts

Q : What height does the ball reach

Q : Mean and standard deviation of the total thickness

Q : Determine the maximum height of the projectile

Q : Determine the charge density of each face of the plate

Q : What is the concentration of trichloroethylene in the water

Q : Equation for the acceleration due to gravity

How important identifying and satisfying target market

Make an interview to an individual that shops online regular

Creating a strategy for entering an international market

Enable proactive chat on a website

What evaluative criteria is of greatest interest to marketer

What when a marketers brand is evaluated by a target market

What is the market share that bureau en gros would need

Request for Solution File

Ask an Expert for Answer!!

Basic Statistics: Mean and standard deviation of the total thickness

Reference No:- TGS0750854

Recent Questions Asked Basic Statistics

Q : How many metric tons of calcium sulfate would be produced

Q : Velocity of both travelers as a function of time

Q : What you would observe as a piece of iron rusts

Q : What height does the ball reach

Q : Mean and standard deviation of the total thickness

Q : Determine the maximum height of the projectile

Q : Determine the charge density of each face of the plate

Q : What is the concentration of trichloroethylene in the water

Q : Equation for the acceleration due to gravity

Asked Questions