Calculate the work in units of kj for the gas expansion
A sample of an ideal gas at 15.0 atm and 10.0 L is allowed to expand against a constant external pressure of 2.00 atm at a constant temperature. Calculate the work in units of kJ for the gas expansion.
Expected delivery within 24 Hoursrs
A solution contains 50.0g of heptane (C7H16)and 50.0g of octane (C8H18) at 25 degrees C.The vapor pressures of pure heptane and pure octane at 25 degrees Care 45.8 torr and 10.9 torr.
One suggested design would use a battery of 10 fluidized beds, each 20m long, 4m wide, & containing solids to the depth of 1m.Findthe rate of reaction within the beds , based on oxygenused.
Gypsum is hydrated calcium sulfate. a 4.89 g sample of this hydrate was heated, and after the water was driven off, 3.87g anhydrous calcium sulfate remained. Determine the formula of this hydrate and name the compound.
What mass of zinc can be plated onto a metal sheet (a process call "galvanizing") from an aqueous zinc sulfate solution using a 0.755 amp current for 1.50 days?
When 9 mL of a solution containing 1.53 M Na3PO4 is diluted to 36 mL, a dilute solution is formed. How many moles of Na+ ions are contained in 18 mL of the dilute solution?
A 28.2 g sample of nickel metal is heated to 99.8 degrees Celsiusand place in a coffee-cup calorimeter containing 150.0 g of waterat 23.5 degrees Celsius. After the metal cools, the final temperature of the metal and the water is 25 degrees Celsiu
SCl2 state the molecular polarity in a 3d sketch of youmolecule and lable the dipole moment of each bond, state weatherpolar or non polar what are the bond angles of SCl2.
Write a Structural formula for a molecule containing three carbonatoms that represent ans alcohol, an organic acid, and anester.
If the sealed-tube manometer shown below had a height difference of 20.5 inches between the mercury levels, what is the pressure in the flask in torr and atmospheres?
Calculate how much 95% ethyl alcohol will be required to dissolve0.1g of sulfanilamide at 78 degrees celsius and Using the volume calculated in the previous question.
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!