Calculate the change in energy of the gas
A gas expands and does P-V work on the surroundings equal to 351 J. At the same time, it absorbs 175 J of heat from the surroundings. calculate the change in energy of the gas.
Expected delivery within 24 Hours
Calculate the freezing point of a solution made by dissolving 3.50 g of potassium chloride (74.55 g/mol) in 100.0 g of water. Assume ideal behavior for the solution; Kf = 1.86°C/m.
What is the pH of a 0.015M HCl solution?If the pOH of a solution is 7.99, what is the [H+]?What is a conjugate acid/base pair?Solid calcuim hydroxide is dissolved in water until the pH ofthe solution is 10.94.
A chemistry student dissolved 500 grams of AlCl3 in 2750grams of H2O. The resulting solution had a density of1.015 g/mL. What is the mol fraction of water in the solution described above?
12.0 moles of gas are in a 5.00 L tank at 23.7 degree C. Calculate the difference in pressure between methane and an ideal gas under these conditions.
A water scientist determined the concentrations of calcium and magnesium ions in a sample by titration with 0.06500 M EDTA. Two 50.00-mL portions were taken. The first titration was carried out at pH 10.00 and required 19.54 mL of titrant to reach
How many kilograms of methane gas must be discharged in a room with a volume of 306 cubic meters to reach the lower explosive limit of 5 volume percent?
A mole of hydrogen gas was found to have an average De Broglie's wavelength of 1A (10^-10m), the approximate length of the H-H bond. What temperature is the gas kept at?
Calculate the value of the equilibrium constant,Keq,for the above reaction at 298.15Kelvin? Use the standard gibbs free energy change you calculated above.
When methane () burns, it reacts with oxygen gas to produce carbon dioxide and water. What mass of carbon dioxide is produced from the complete combustion of 8.40×10-3 g of methane?
An open-end mercury manometer is connected to a low pressurepipeline that supplies a gas to a laboratory. Because paint wasspilled on the arm connected to the line during a laboratoryrenovation, it is impossible to see the level of the manometerfl
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!