Meaning of pre-emphasis

Illustrate the meaning of pre-emphasis in brief?

E

Expert

##### Verified

Pre-emphasis: Enhancing the signal to noise ratio by raising the magnitude of higher frequency signals with respect to the lower frequency signals.

#### Related Questions in Electrical Engineering

• ##### Q :Find out the number of turns of a coil

A coil wound upon an air-filled former of length 10 centimeter is fed along with a current of 2 Amp. If the coil should produce a magnetic flux density of 0.1 Wbm-2 within the former, find out the number of turns needed.

• ##### Q :Calculate the current needed to feed

A coil having of 6,000 turns is wound upon a former of length 12cm and diameter 3cm that has a wax core having a relative permeability of 1,500. The coil should produce a total magnetic flux of 0.1 Wb. Calculate the current needed to feed the coil.

• ##### Q :Calculate maximum length of cable when

A simple transistor buffer is needed to drive a length coaxial cable containing a capacitance of 100pF per meter length. The whole steady-state power dissipation of the buffer should not exceed 250mW and the propagation delay of a pulse transmitted along the cable sho

• ##### Q :Explain about the shared data problem

Explain about the shared data problem.

• ##### Q :Meaning of half-duplex and full-duplex

Illustrate the meaning of the term half-duplex and full-duplex communication? Describe in brief.

• ##### Q :What do you mean by the term modulation

What do you mean by the term modulation? And where it is employed?

• ##### Q :Illustrates the characteristics of

Illustrates the characteristics of synchronous communication?

• ##### Q :Layout for Digital Circuits Provide

Provide some significant Design methods you could follow when doing the Layout for Digital Circuits?

• ##### Q :Estimate the current flowing from

A bipolar junction diode contain a uniform cross-sectional region of 2x10-3 cm2 and a doping concentration of 1013 cm-3 in p-type and n-type both materials.  Therefore diffusion properties are Dn = 5 cm2s-1, Ln = 50 µm for (e-

• ##### Q :Priority modes in the 8259 Write down

Write down the priority modes within the 8259?