Explain RAM processor and the data types supported by it

Explain RAM processor and the data types supported by it.




This is said to be the family of RISC architecture. This ARM instruction is written one per line, starting after the primary column.

The data types supported by RAM are as follows:

Standard ARM word is 32 bit long
Word is split into 4 8 bit bytes.

   Related Questions in Electrical Engineering

  • Q : Find out the impedance of the series

    Find out the impedance of the series R-L network demonstrated in figure below at a frequency of 1 kHz and state this in the form of phase and magnitude. Calculate the current flowing in the network from the source and the individual voltages across the resistor and th

  • Q : Scan design and generic forms of scan

    Specify three generic forms of scan designs. Explain what is meant by the scan register?

  • Q : Hamming code Specify the intention of

    Specify the intention of using the hamming code?

  • Q : Indirect Grid Connection & battery bank

    Large-scale use of wind power raises many questions in integration into the existing electric power grid. Wind power is an intermittent energy source which must be used when available. If a large fraction of a system's energy is to come from wind power, provisions must be made to supply load duri

  • Q : What is multiplexer Explain what is

    Explain what is meant by the term multiplexer? Also explain multiplexing displays?

  • Q : Explain VRC Explain the term VRC.

    Explain the term VRC.

  • Q : Find out reactance of values of

    Find out the reactance of the values of capacitor at the frequencies given below. Then find out the value of inductor in each case that will provide similar reactance as the capacitor as follows:.

    (a)  3.3 µF at 50Hz

  • Q : Illustrates the task and Task state

    Illustrates the task and Task state?

  • Q : Zener breakdown introduction What do

    What do you mean by the term Zener breakdown? Describe in brief.

  • Q : Find value of load resistance for

    Establish an expression for the loaded overdrive factor that σL, of the transistor in the inverter circuit demonstrated below in terms of the circuit parameters. Determine the minimum allowable value of the load resistance RL when the inver

2015 ©TutorsGlobe All rights reserved. TutorsGlobe Rated 4.8/5 based on 34139 reviews.