How much electrical power is needed for part b, Mechanical Engineering

+44 141 628 6080
[email protected]

How much electrical power is needed for part b

An electric-powered water pump must fill up a 50,000 gallon elevated water tank in which the water averages 60 feet above the pump and water source.

a) How much energy does that take?

b) If the 50,000 gal. must be pumped up in 2 hours, how much power will it take to do this at a steady state? (give answers for (a) and (b) in English units.)

c) The motor/pump combination is 75 % efficient in converting electricity to fluid kinetic energy - how much electrical power is needed for part (b)?

View Complete Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: How much electrical power is needed for part b

Reference No:- TGS0734205

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : What will be the final average room temperature

0.25 kg of red-hot (700 C) coals are taken from the fireplace and left in the middle of a room. The room is 3 m x 4 m x 2.6 meters high.

Q : Magnitude of electrical field in the region between plates

Two large, parallel, metal plates carry opposite of equal magnitude. They are separated by 45.00 mm, and the potencial difference between them is 360V. a) What is the magnitude of the electrical field ( assume to be uniform) in the region between t

Q : Find equal annual payment series that equivalent to payments

Find the equal annual payment series that would be equivalent to the following increasing series of payments if the interest rate is 12% (a) compounded annually; (b) compounded continuously.

Q : Find the maximun speed and maximun acceleration

Find the maximun speed and maximun acceleration of each of these particles. When do these maxima occur: Just the following the release of the particles or after a very long time?

Q : How much electrical power is needed for part b

An electric-powered water pump must fill up a 50,000 gallon elevated water tank in which the water averages 60 feet above the pump and water source.

Q : Confidence interval estimate for the population mean

The quality control manager at a light bulb factory needs to estimate the mean life of a large shipment of light bulbs. The standard deviation is 100 hours. A random sample of 64 light bulbs indicated a sample mean life of 350 hours. Construct a 9

Q : Paragmagnetic material at a different temperature

A solenoid with n=1800 turns/m and a current I1 = 3A is filled with a paragmagnetic material at T1 = 250 K. A second solenoid with n2 = 1500 turns/m and a current I2 = 1.1A is filled with the same paragmagnetic material at a different temperature

Q : What is the temperature of the inside wall surface

A building wall is made of 200 mm of poured concrete on the outside, 100 mm of fiberglass insulation in the middle, and 15 mm of sheetrock on the inside.

Q : How hot will the inside air get under these conditions

An enclosure box surrounds some electronics that draw 25 W of electrical power. For heat transfer we will just consider the biggest wall and ignore other sides, in this case.

1923459

Questions
Asked

3,689

Active Tutors

1441658

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: How much electrical power is needed for part b

Reference No:- TGS0734205

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : What will be the final average room temperature

Q : Magnitude of electrical field in the region between plates

Q : Find equal annual payment series that equivalent to payments

Q : Find the maximun speed and maximun acceleration

Q : How much electrical power is needed for part b

Q : Confidence interval estimate for the population mean

Q : Paragmagnetic material at a different temperature

Q : What is the temperature of the inside wall surface

Q : How hot will the inside air get under these conditions

Outline a social issue that is important to you

How we perceive objects in the real world

Why you feel unpleasantly hot and sweaty

Problem concerning consensual sexual relationship

Examine historical literature to the most current period

Describe the results, including any scores

Discuss children diagnosed with developmental disabilities

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: How much electrical power is needed for part b

Reference No:- TGS0734205

Recent Questions Asked Mechanical Engineering

Q : What will be the final average room temperature

Q : Magnitude of electrical field in the region between plates

Q : Find equal annual payment series that equivalent to payments

Q : Find the maximun speed and maximun acceleration

Q : How much electrical power is needed for part b

Q : Confidence interval estimate for the population mean

Q : Paragmagnetic material at a different temperature

Q : What is the temperature of the inside wall surface

Q : How hot will the inside air get under these conditions

Asked Questions