For a certain process at 27degc dg 2106 kj and dh -1682
For a certain process at 27°C, DG = +210.6 kJ and DH = -168.2 kJ. What is the entropy change for this process at this temperature? Express your answer in the form, DS = ____ J/K.
Expected delivery within 24 Hours
design a circuit to limit the output voltage between -5v and+5v. the input is a sinusoidal source with a peak value of 10 v and a frequency of 1KHz.
The membrane that surrounds a certain type of living cell has a surface area of 4.4 x 10-9 m2, The potential on the outer surface of the membrane is +52.2 mV greater than that on the inside surface. How much charge resides on the outer surface
Describe how alignment between the values of an organization and the values of the nurse impact nurse engagement and patient outcomes. Discuss how an individual can use effective communication techniques to overcome workplace challenges, encourage co
design a Zener regulator with an output voltage of 7.5 v. the supply voltage can vary between 10 v and 25 v and the load current between 10 mA and 60mA.
design a DC power supply with an ouput voltage of 12 v from an Ac source of120 v rms and 60 HZ. the rms ripple voltage should be limited to10% of the DC output. use a load resistance of 10 KΩ
A horizontal power line of length 52 m carries a current of 1.4 kA, find direction of the magnetic force on the power line
Calculate DG0 for the reaction below. The standard molar entropy change for the reaction at 298 K is -287.5 J/mol·K.
A potentiometer is used to measure the position of a shaft. theinput range of shaft position is from - 160o to +160o . the corresponding output range is from -20 to +20 v. what is the span of this position sensor
1933800
Questions Asked
3,689
Active Tutors
1452459
Questions Answered
Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!
Problem: Please use these articles Customer Relationship Management: Methods, Opportunities and Challenges
Answer: What are the main reasons why consumers choose to leave a healthcare organization?
Specifically, you must address the following: - access to insurance coverage - new providers' payment methods
What is the best way to avoid nursing burnout? Frequently change jobs Focus mainly on patient care Prioritize self care
Question: Which of the following nursing roles is not considered an advanced practice role? Need Assignment Help?
The nurse witnesses some patient care that was "appalling." What should the nurse do first? Accept that this is the reality of nursing in
Recap the significance of employing PST in athletic injury recovery, particularly for Triple H's rotator cuff injury. Suggest future directions